When modding a car from the start: (order of mods list for best results!!!)

**bbunt302** · 12-02-2007, 11:42 AM


Quote: Originally Posted by sledgehammer where could I look for a set of 3.73 gears and t-lock for cheap(er). gefracing is too expensive. Also, what kind or brand of tuner would you (as in ME experts) recommend. Is a flash tuner or a chip better?

GEFRacing is the cheapest place I know of for FRPP gears. As for the tune, I would recommned you take it to a shop to have it dynoed and a custom chip burnt. It's really a waste though until the car has some serious mods (aka H/C/I or forced induction).

sledgehammer · 12-02-2007, 11:50 AM

okay . thanks

corkwood06 · 12-04-2007, 06:11 PM

hey do they make performance pullys for 2003 v6?

Taywi · 12-06-2007, 12:56 AM

can you pass inspection without Cats?....

matthews.stang · 12-06-2007, 01:06 AM


Quote: Originally Posted by Taywi can you pass inspection without Cats?....

Depends on the state.

They didn't check for my cats last time, but then again you could hallow them out and weld the back up, and who would know the difference.

Taywi · 12-06-2007, 08:21 AM


Quote: Originally Posted by matthews.stang Depends on the state. They didn't check for my cats last time, but then again you could hallow them out and weld the back up, and who would know the difference.

yeah i was just wondering cause when i had the 79 i don't think they put the cats back on when they did my exhaust... and i was wondering if when i get the 98 done if they take them off and i end up keep the car for a long time and move to NC in a couple years like i plan to will i be SOL

2002 mustang V6 · **Re: mods help!!**

where do u guys get your mods from, like what site or store... i just want the best for my mustang!!!! :wtf2:

afinley11 · **Re: mods help!!**


Quote: Originally Posted by 2002 mustang V6 where do u guys get your mods from, like what site or store... i just want the best for my mustang!!!! :wtf2:

Call Tom @ SSMS, Matt @ Delk, or Mike @ Rpm-mustangs...They can give you a good heads up on where to track down things...What ever you do stay away from Rpm outlet....

runvsofthisbull · 01-22-2008, 06:01 PM

Hey man I don't know about you but you are giong to have to buy a shim kit and whatnot seperate if you order you gears from them. Jegs.com has a steal on 3:45, 3:73 and 4:10 plus and overhaul kit for the 7.5 rear and 8.8's. Its under $300 I think it was $287 to be exact, but look what you get. Just gears are only $159 from them so check it out bro. Here is the link. Happy shopping

JEGS Ring & Pinion Sets and Kits - JEGS

afinley11 · 01-24-2008, 04:30 AM


Quote: Originally Posted by runvsofthisbull Hey man I don't know about you but you are giong to have to buy a shim kit and whatnot seperate if you order you gears from them. Jegs.com has a steal on 3:45, 3:73 and 4:10 plus and overhaul kit for the 7.5 rear and 8.8's. Its under $300 I think it was $287 to be exact, but look what you get. Just gears are only $159 from them so check it out bro. Here is the link. Happy shopping JEGS Ring & Pinion Sets and Kits - JEGS

He could also buy a master install kit from americanmuscle.com

**Herbstang** · 01-24-2008, 07:19 AM


Quote: Originally Posted by afinley11 He could also buy a master install kit from americanmuscle.com

Exactly !!!! Support the site sponors

**Herbstang** · **Re: mods help!!**


Quote: Originally Posted by afinley11 Call Tom @ SSMS, Matt @ Delk, or Mike @ Rpm-mustangs...They can give you a good heads up on where to track down things...What ever you do stay away from Rpm outlet....

True words of wisdom

RPM outlet SUCKS

afinley11 · **Re: mods help!!**


Quote: Originally Posted by Herbstang True words of wisdom RPM outlet SUCKS

yeah I had ordered a chip from them when I first started modding my car and it took them 1.5 years to repond to any email as to why I never got mine! then I had to fight for another 6 months to get my money back!!!

afinley11 · 01-26-2008, 08:58 AM


Quote: Originally Posted by Herbstang Exactly !!!! Support the site sponors

There prices are great espc on rims and tires! I have done a decent amount of business with them...and free shipping too

hendog4321 · 02-22-2008, 01:26 PM

Thanks for the list RGR. This is very helpful.

02mach6stang · 06-14-2008, 07:54 PM

I have an 02 3.8l 5 speed and i was going to change my gears to 4.10 on this forum it suggests the 3.73 gears. why is this? why would only it be suggested on a automatic

Ryan H · 08-25-2008, 07:31 PM

What is a shifter kit? i have no idea whatsoever what that is, and where can i buy one if its worth the money?

1234 · 08-25-2008, 08:01 PM

It makes you automatic transmission shift firmer and quicker. Check out the site sponsors

captainsteve57 · 08-26-2008, 02:21 AM

Well my 07 and 08 gt both came stock with 2.5" exhaust 3:55 gears So the newer cars get a good head start right off the lot.

bauer08 · 09-26-2008, 08:47 PM

I have been told that if you replace the exhaust system without the doing the headers that the flange on the stock headers might not be able to hold up. Any truth to this or was someone just tryin to get me to spend extra money?

1234 · 09-26-2008, 09:24 PM

Trying to get you to spend extra money.

upton7 · 01-13-2009, 11:39 PM

i have an 01 automatic i'm getting a 4.10 and lok differential which i can get at american muslce i also want a shift kit does anyone know where i can get one of those i heard summit might but i am not sure

1234 · 01-14-2009, 08:08 AM

You dont get shift kits anymore you get a tuner and it firms up the shifting.

MistaG84 · 02-02-2009, 01:18 PM

Where can i get underdrive pulleys 4 v6 3.8L?

1234 · 02-02-2009, 01:27 PM

Did you check the site sponsors?

MistaG84 · 02-02-2009, 01:38 PM

no. I usually but american muscle cuz of the free shipping but they dont have 4 3.8L

**PureVenom** · 02-02-2009, 01:40 PM

Check atomic performance as they also have free shipping along with the discount for evolution members. If it is not on their website, PM Jeff (user ID Atomic Performance) and he will get you set up.

MistaG84 · 02-02-2009, 01:45 PM

thanks venom. i think u were the only one to look at my profile, right? what other websites can we get discounts on so i can start shopping!! i want to beat v8 w/my v6. that is my goal but its pretty stock. all i got is rims n cold air intake i did myself.

MistaG84 · 02-02-2009, 01:58 PM

i want to get the sct livewire, after i get it should i still chip the car?

1234 · 02-02-2009, 02:10 PM

You cant persay chip the car. Its all done threw a hand held tuner like the SCT livewire. So no you wouldnt need to chip it.

**PureVenom** · 02-02-2009, 02:12 PM

The livewire replaces the chip. However, don't get the livewire, get an xcal2 or 3...the livewire doesn't provide anything to make the cost difference worth while.

Also, just shop through atomic. We get a small discount through american muscle that you will have to pm them about (AMnick I think is his user id)...however atomic carries pretty much all the same parts...and if it isn't on their site, odds are he can still get it for you.

MistaG84 · 02-02-2009, 02:13 PM

ok. what tuner do u have?

MistaG84 · 02-02-2009, 02:21 PM

cool. i have a 95 t-bird supercharger that i would like to install on my v6. the bolt patterns r different so i have to weld a triple layer plate for charger n top of engine. before i even attemp to do that i wanna strengthen the block and replace all interior engine parts first. i am not a mustang guy i owened a 3000gt before my stang. i dont know how well the engines hold up under pressure and after im done w/car i want to add a 75shot wet on it.

**PureVenom** · 02-02-2009, 02:31 PM


Quote: Originally Posted by MistaG84 ok. what tuner do u have?

I've got an XCal 2....

MistaG84 · 02-02-2009, 02:32 PM

the only difference is that the xcal3 dont show est.hp/trq i dont have access to a shop right know and that information would be very usefull for me. i know theres a big price difference but im gonna have to deal w/it untill i find a shop.