RAZZI GROUND EFFECTS
’94-’98 MUSTANG INFO & PRICING
You asked for it…..Razzi delivered! You asked us to “Re-Design” our ’94-’98 Mustang Ground Effects Kit. You told us to make it look more like the newer designs seen on some of the newer Mustangs like a “Splitter” designed Front Air Dam and an aggressive Rear Air Dam showing off the Mustang’s Dual exhaust.
WE DELIVERED……AND WE DELIVERED BETTER THAN ANYONE EXPECTED! (Take a look at the Pics attached)
The ’94-‘98 Razzi Mustang GFX consists of a “Splitter” designed Front Air Dam, a Rear Air Dam showing off the Mustang Dual Exhaust, and a Set of matching Side Skirts. These parts are manufactured by Razzi at their plant in Alpharetta, GA. Razzi uses their own proprietary material called AERO-FLEX® plastic, which is an ABS composite plastic material that was developed specifically for the manufacture of ground effects products. The parts will fit extremely well and minimum alteration, if any, should be needed to achieve a perfect fit. The ’94-’98 Mustang Ground Effects kit will fit both the GT Mustang and the V-6 Mustang during those years. The parts will be attached to your Mustang using two-way tape, silicone adhesive, and screws. Everything needed for the installation is included with the kit. Razzi parts are designed to be permanently installed on the vehicle. In the event of an accident, you can buy spare parts for your kit from Razzi. To install the ’94-’98 Mustang Front Air Dam, you will have to cut away some of the lower part of the factory bumper cover to make room for the design on our Razzi part to be attached. Our installation instructions will clearly show you how to do this....this is not a problem. You will not remove any of your factory bumper cover braces or safety devises. The Installation Instructions that are included with every Mustang kit will show you how to do everything and the screws, silicone adhesive, and any necessary items come in the box with the Razzi Ground Effects kit. We make all our Razzi parts to go over or attach onto the existing factory bumper covers. The factory bumper covers on your Mustang have been crash tested and safety approved so they work properly with the vehicle's "air bag" safety systems. We do not feel that these factory parts should be removed and replaced with parts that have never been tested in any way and we disagree with any company who recommends that. We have checked with all OEM manufacturers (GM, Ford, Toyota, etc) and cutting or modifying a front or rear bumper cover to enlarge a hole is perfectly acceptable.....as long as none of the bumper supports are removed (which we never do). Also, since our Razzi parts are intended to be put on the vehicle permanently (not to be removed), it is perfectly acceptable to cut or modify the bumper covers in certain areas to allow for our part's designs to fit. Our Razzi parts will cover up any alteration made to the factory bumper covers. The primary accessory items that can be purchased along with the GFX are the Stainless Steel Exhaust tips that keep the hot exhaust from blowing on the Rear Air Dam and warping it (they also make the rear look “hot”) and the Mesh Screen set that is attached to the backside of all the holes in the Front and Rear Air Dam. The Front Air Dam also accommodates 4 Inch Round Driving lights (the factory driving lights will be taken off). This look for the ’94-’98 Mustang is truly “awesome”.
’94-‘98 FORD MUSTANG GROUND EFFECTS AND
ACCESSORY PRICING
KIT - Kit # 242-100H (*New Design as of 8/04) Rear Exit Dual Exhaust (includes Front Air Dam, Rear Air Dam with dual exhaust, and a Set of Side Skirts….also includes instructions and hardware)…….$750 (Plus $65 Freight – Shipping to a “business address”)
SEPARATE PARTS: Any component of a Mustang GFX kit can be purchased separately. Here are prices of individual parts:
- Mustang Front Air Dam ($295 plus shipping)
- Rear Air Dam ($295 plus shipping)
- Side Skirts ($285/set or $150 each plus shipping)
EXHAUST TIPS ONLY: These tips are Stainless Steel, 10” Long, cone shaped with a 4” round opening with a lifetime warranty against rust.
- V-8/GT: Requires 2 tips.
Cost: $35 ea ($70 for two)
- V-6: Requires an Exhaust tip kit so you create a dual look. One of the tips will be put on the V-6 functional tailpipe. The other tip will be attached to a bracket on the other side…..this tip will NOT be functional, but it will still look like duals.
Cost: $85 (2 tips plus the bracket and all clamps)
MESH SCREEN SET
(for Front and Rear Air Dam openings) … $39
LIGHTS:
(NOTE…THE FACTORY MUSTANG LIGHTS WILL NOT WORK IN
THE RAZZI FRONT AIR DAM!)
The RAZZI Mustang Front has openings in the Front Air Dam for 4 inch Round Lights. The lights we sell come complete with wiring, switch, instructions, mounting brackets/cups, and two (2) lights:
Regular 4 inch Round Lights (RLK-103): $47
(NOT Angel Eyes)
Angel Eye” Round Lights (RALK-103): $69
Angel Eye Light has glow ring around it
SHIPPING COST:
Shipping inside the Continental 48 United States to a “commercial” or business address- $65. (Residential delivery is $50 EXTRA!) This kit comes shipped in a large box by a common carrier (18 wheeler truck) – it is too big a box for UPS. Shipping to another State outside the Continental 48 United States, such as Hawaii, Alaska, or shipping to another country will require additional shipping charges. Call Razzi Sales to get your exact shipping quote. Read the “Shipping” section in our Razzi FAQ file on our Razzi.com web site.
HOW TO GET A RAZZI ’94-’98 MUSTANG KIT AND ACCESSORIES:
If you’re interested in getting one of the Razzi Mustang Ground Effect packages for your car, Razzi® Ground Effects has a nationwide network of over 400 Authorized Razzi Restyler Installation Centers. This means that in almost every major city in the U.S. (and even in Canada for that matter), there is someone who can help you as far as purchasing the package and even painting and installing it for you. If you upfit your car and then move to another city or state and need a replacement part or some other service, Razzi can put you in touch with the “Razzi Restyler” in that town to service your ground effects. In the event of an accident, any Razzi part can be purchased separately as a replacement part and all parts are labeled for proper identification. Any of this information is available by calling Razzi and asking for Customer Support (800) 235-6087 or by accessing Razzi on their web page (
www.razzi.com) and sending an E-Mail with your questions (info@razzi.com). If you own a 1994-1998 Mustang and would like to do-it-yourself, the pricing for your Razzi Mustang accessories are on the previous page. Note that these prices do not include the painting or the installation of the parts if you have them done by a professional. If you do-it-yourself, you’ll have to get them painted by a body shop and then you can install the kit yourself. Sorry, we do not pre-paint any Razzi kits here at the Razzi manufacturing factory. The price of the Ground Effects kit does not include the Mesh, the Tailpipe Exhaust Extensions, or the Driving Lights. These are additional cost items.
TO ORDER, CALL RAZZI SALES (800) 235-6087
WE TAKE VISA OR M/C.
CALL TODAY!
