Mustang Evolution Forum banner

Search results

1-16 of 16 Results
Advanced Search
  1. Anyone use this cam?

    Pre-2005 V6 Mustang
    http://www.supersixmotorsports.com/_pdf/3.8_4.2/SSM2013catrev1CamsRockerArms.pdf If you look at this pdf you'll see a wide array of cams you can use for the 3.8 V6. One, in particular, is intriguing to me. It's the last one on the list. Duration: 240/250 Lift: .57/.59 Rockers: 1.7 LSA...
  2. Chevy 3.8 sound vs. Ford 3.8 sound?

    Pre-2005 V6 Mustang
    Do these engines sound the same? I've read that the Ford 3.8 was just a ripoff of the Buick V6. If that's the case wouldn't these engines essentially be the same? Wouldn't they produce the same sound if they had the same exhaust? The reason I'm asking is because I found a video of a cammed 3.8...
  3. Should I take a chance and buy this 8.8 rear end?

    General Mustang Discussion
    So I found this 8.8 rear end from a 2000 GT Mustang on Craigslist: https://batonrouge.craigslist.org/pts/5909682617.html It has 4.10 gears, gt500 clutches, and stock axles. It also has a nice brace welded to the main housing for extra support. The rear end had 100 miles on it with those new...
  4. This is the worst exhaust combination for a 99-04 V6.

    Pre-2005 V6 Mustang
    Okay guys I may have had an overreaction after first putting the system on my car. At the time when my dad first fitted it I didn't realize that he didn't screw the system tight because we had to take the H Pipe off again to paint it. There was also an exhaust leak on the H Pipe where it...
  5. This is the worst exhaust combination for a 99-04 V6.

    Pre-2005 V6 Mustang
    Ok I see. So a good bet would be to measure the pipe and find the longest resonator that can fit there?
  6. Can anyone explain this?

    2005-2010 V6 Mustang
    https://www.youtube.com/watch?v=Jc3b3aTglGE His setup is: Pacesetter long tube headers Pacesetter off road h pipe Roush over axle pipes Muffler delete axle backs Roush intake Can anyone explain how this guy has the best sounding V6 mustang I've ever heard and he's running LT headers with...
  7. This is the worst exhaust combination for a 99-04 V6.

    Pre-2005 V6 Mustang
    Yeah I'm running dual exhaust. Is 18" a good length or should I get a longer length?
  8. This is the worst exhaust combination for a 99-04 V6.

    Pre-2005 V6 Mustang
    So would 2 18" vibrant ultra quiets do the trick or should I run more than 2?
  9. '02 3.8 life span

    Pre-2005 V6 Mustang
    Keep in mind I also delivered pizza in it for a while and put a lot of hard stop and go miles on it. I also run the hell out of it. The motor still hasn't blown. LOL
  10. This is the worst exhaust combination for a 99-04 V6.

    Pre-2005 V6 Mustang
    MAC LT Headers, MAC Off Road H Pipe and Borla S Type Catbacks on my 2000 V6. It sounds horrible. I now hate myself car for putting it on. I'm disgusted with my car. I don't even like to look at her anymore. I thought it would have a clean loud V6 noise. It sounds like a raspy Honda. A Honda...
  11. Flare cap for MAC LT headers?

    Pre-2005 V6 Mustang
    I bought some MAC LT headers for my 2000 V6 and they have flare tube fittings on the front tubes of the headers. I have gone to True Hardware, Colburn's, Lowe's, Autozone, O'reilly's, Advance Auto Parts, and Napa. None of them have a flare cap that fits on the tube. I just called the guy at MAC...
  12. Supercharged 3.8 L

    Pre-2005 V6 Mustang
    You can make 3.8s fast but it will cost you. The stock engine might hold an 8 psi pulley. You can go to super six Motorsports and get everything you need to beef the engine up. I mean everything. Heads, cam, intakes, wiseco forged pistons, stroker kit, etc. You can even buy a fully forged and...
  13. '02 3.8 life span

    Pre-2005 V6 Mustang
    The life span should be good. I got a 2000 V6 with 189k on it and hardly anything has broken on it throughout its lifetime. My mom bought it new in 1999 and gave it to me in 2014 so I know how it was maintained, and let me tell you, my mom didn't take good care of it. Sometimes it went 6000...
  14. KONI STR.T Struts...

    Pre-2005 V6 Mustang
    My factory boots are probably shot. 187k miles on the original struts. I was looking at Sensa Trac and GR 2s and saw those came with some dust boots and mounts for pretty cheap. Could I use the boots and mounts for either of those on the Koni STR.T's? Or would I be better off ordering some new...
  15. KONI STR.T Struts...

    Pre-2005 V6 Mustang
    American muscle has them for a really good price ATM. March Madness sale. I want to purchase them but I have a big question that I can't get a straight answer to: what kind of strut mounts and boots can I use with these? They're not sold with them and when I do a google search I can't find any...
  16. K&N FIPK CAI or C&L 73mm MAF Kit?

    Pre-2005 V6 Mustang
    Okay so I have a 2000 V6 and I'm trying to decide what would be the better CAI for me. There's the K&N FIPK CAI which is the most expensive one for my car and also has a huge filter. I really like K&N. Their stuff is legit. K&N Mustang FIPK Air Intake Kit 57-2532 (99-04 3.8L & 3.9L V6) - Free...
1-16 of 16 Results
Top