Search Results for ‘2002 mustang’

So I made a newbie mistake and disconnected the ECU without disconnecting the battery, (I was installing tuning equipment) I burnt up injector drivers on the ECU and car wouldn't run right when everything was reinstalled. I bought a used dash, key cylinder and ecu and the car crunk up and ran...

I'm just confused because I've seen on many forums and things where they say y pipes sound like crap on a v6 which from audio clips I say I agree. I was thinking of H-pipes because I read they tend to be a bit deeper sounding than x-pipes. I don't know what's best. I'm very new and my car is...

Hey guys, I have a 2002 Mustang gt currently lowered on sve lowering springs from lmr with isolators and eibach shocks. It has 17 inch fr500’s and has really bad wheel gap. But the exhaust hangs lower than the rest of the car (which i hear is a common thing) and I feel if I go lower I will have...

So im curious as to when you guys that have a new edge gt see when its time to fill up your tank. Would it be bad if I fill up when the gauge reads on or a tiny bit under the red line on the gas meter? I heard that running close to out of gas is bad on your fuel pump.:banghead: I usually put a...

I have a 2002 Mustang GT that I recently hit one of those cement guard posts with (not very big) at a gas station sadly, but I wasn't even going but like 2 mph maybe and only resulted in a rash on the paint, but barely to no bumper damage besides that. I plan to get a cobra front bumper that is...

I'm having a hard time finding a power brake booster rod boot. Just the boot. Does anyone know where I can buy one

My Mustang is in need of maintenance. The 02 GT is now in need of a few parts, and I am looking for the most economical stuff I can find. Quality is important also, but this time of the year cash flow is tight. No, I do not have a Facebook account. I am not interested in Facebook. I am however...

im new to the whole Mustang scene well new to building vehicles never really been mechanically inclined i love my car and want to build it to the way i want it so bare with me i have a lot of questions. Thanks in advance for all the help guys! 1. looking to upgrade my clutch can i use my stock...

Yesterday I went to start my car and it acted as if it was out of gas. I tried turning it over again and got the same response. On the third try the car fired up and ran like it should. I moved it to the end of my 1/4 mile long driveway to cut grass. When I got back in the car the same exact...

Hey everyone I had a question about replacing my stock mid pipe. I want to get a pypes off road h pipe that will be paired with my SLP 1 resonators I welded in. The question I have is after I change the mid pipe will I have enough back pressure in my exhaust system? Will I lose power from doing...

I recently purchased this vehicle as a project car. I am looking to do a complete overhaul of this car. I am in the process of removing everything from the car and getting the car sandblasted and painted. I am looking for opinions on which is a better idea. To have a machine shop build...

I'm wanting to put new bushings on my car I had it on a lift the other day and noticed my front lower control arms bushings were pretty bad looking . I was wanting to know what bushings to get that are good for the job Sent from my iPhone using Mustang Evolution

Hey everyone I just needed some help with something that has been going on for a while. My mustang has been making a weird noise and I don't know what it is. When I had my factory cold air intake on it, it made this like blooping noise. Almost like a milk jug when you pour water out to fast and...

Hey I have a 2002 mustang GT with rust on my rear quarter panel of my car. I was wondering if the rear quarter panels on the base mustangs (v6's) are the same as the ones on the GT's. I was going to cut out the part I need on the v6 to use it like a patch panel. Does anyone know if its the same?

Hello new mustang friends I'm JD I been building and racing fox bodies for about 16 years but it's time for me to build a new race car and I got a great deal on two newer mustangs 275.00 for both cars I just bought two mustangs 2002 GT and a 99 LX I also have a 1985 GT with a new 351 and 5...

Ok so after work went to start up the car turn the key made a fast clicking sound then lost all power finally got it started with some cables and made it all the way home turned the car off then I tried to start it again and it did the same thing got it jump with cables again let it idle then...

Its fine when it idles but when I start to rev it or drive it, it makes like a weird popping/ticking noise. Repeatedly. Especially around the 1500 - 2300 RPM's. I noticed that the sound only starts to happen once the car has warmed up a bit. If I drive it cold the noise doesn't happen...

I have a 2002 mustang GT and it has a bad rust spot on the passenger side rear quarter panel. I was wondering if anyone knows where I can buy a patch panel for my 2002 mustang. Or any other suggestions on how to fix it. Thankyou. Sent from my iPhone using Mustang Evolution