Mustang Evolution Forum banner
1 - 5 of 5 Posts

·
Premium Member
Joined
·
14,477 Posts
01 V6 has a 7.5, i'm not too sure if it will fit in an 89 though. Maybe someone else knows.
 

·
Premium Member
Joined
·
5,330 Posts
Gears:

- 94-98 v6's had the 7.5" rearend with 2.73 gears.

- 99-04 v6's also had the 7.5" rear but with 3.27 gears

Axles:

- 1994-1998 Mustang rear axles are 3/4" wider on each side than a 79-93 Mustang.

- 1999 and newer Mustang rear axles are about 1 7/16" wider on each side than a 79-93 Mustang.

- 94 and newer Mustang 8.8 will bolt into a 79-93 Mustang but will require brake line adapters.

- Lincoln Mark7 LSC, SVO Mustang and Fox Body Saleens use a rear axle that is 1.25" wider per side than the 87-93 Mustangs.

- 94-95 spindles share the same track width as 79-93 spindles.

- 96 and up spindles have an 8mm wider track width.

- 79-93 Mustangs all use 9" drums with 7.5 and 8.8 rear axles.
 
1 - 5 of 5 Posts
Top