Mustang Evolution Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
41 Posts
Not too bad a job if you have the parts. I converted a '69 from an auto to a manual years ago, but I had a '66 parts car with all the pedals, linkages, tranny, etc. Even the driveshaft from the '66 worked. I was only about 16 and did the swap in a day.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top