Mustang Evolution Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
im wondering if all these parts are good...i have 302 going to bore it 0.40 eagle crank 0.400 forged pistons rods..hooker long tube headers comp cam 634 lift 290 dur edlebrock rpm intake 275mm tb 45 lb injectors port and polish heads intakecomp lifters vaulve pushrods torqueconverter coldair intake elc fan msd ign and dis for 9in rear 4.10 gears c4 trans comp rockers double timing chain shave the heads a little thats about it
 

·
Registered
Joined
·
28 Posts
All that and not Converting to manual, I'd cry. :)

Everything else sounds good just check your numbers to make sure the converter can handle it, and make sure you got a good block with shaving the heads and boring.
 
1 - 4 of 4 Posts
Top