Mustang Evolution Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
I am picking up a trick flow street burner top end kit. Already got a 70mm tb and a 75mm maf calibrated for 24's. Which brand of injectors will work best on the twisted wedge heads using the stock fuel rail?
 

·
Registered
Joined
·
861 Posts
Never run your injectors at more than 80% duty cycle. That being said you MIGHT be able to get away with 24s but you can save yourself the hassle and get some 30s... wouldnt have to worry until you stroked or added
 

·
Banned
Joined
·
422 Posts
I would go 30s also. That kit should put you in the 290-320whp range depending on other mods and i think you may max out the 24s before that point.
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #10 ·
Thanks for all the info, can I get my maf re calibrated for 30lbs? I have a pro m I picked up some time ago.
 
1 - 11 of 11 Posts
Top