Mustang Evolution Forum banner

1 - 20 of 22 Posts

·
Registered
Joined
·
598 Posts
If your car is lowered you will have to roll the inner quarter lips a good bit to run 315. I have 18x10 with 305/35-18 nitto drag radials. I had to roll my inner quarters to allow clearance.
 

Attachments

·
Registered
Joined
·
1,140 Posts
I also have to agree if you go with a 305 or 315 it's definitely a good idea to roll the quater lip, and IMO the 315's look the best!!!
 

·
Registered
Joined
·
598 Posts
RUNNWLD said:
Ah doin that will scare the **** out of me.
That's funny I have owned a dozen lowered cars and that's always the old school way of doing it. I also used an actual lip roller on my M3. The wheel roller is the best if you can find one.
 

Attachments

·
Registered
Joined
·
598 Posts
I know tire rack used to rent them. I would also check with a high end rim shop in your area. In Atlanta we have Butler tire who offers the service.
 
1 - 20 of 22 Posts
Top