Mustang Evolution Forum banner

1 - 13 of 13 Posts

·
Premium Member
Joined
·
1,461 Posts
Discussion Starter #1
For my project RDX intake, I think I'm going to need a stock TB from a 99-04. Let me know if any of you have one.
 

·
Registered
Joined
·
1,065 Posts
97Stallion said:
For my project RDX intake, I think I'm going to need a stock TB from a 99-04. Let me know if any of you have one.

I got a 65mm one, from a truck, same bolt pattern.
 

·
Registered
Joined
·
414 Posts

·
Registered
Joined
·
3 Posts
If your still looking for a stock t-body, I have one. I have a 2004 mustang V6 and changed it with a BBK 70mm t-body. PM me if you are still looking for one.
 

·
Registered
Joined
·
263 Posts
charlie6n said:
If your still looking for a stock t-body, I have one. I have a 2004 mustang V6 and changed it with a BBK 70mm t-body. PM me if you are still looking for one.
What kinda stuff you got on your car? 70mm is pretty big and for a car that new I'm wondering if you have enough work on the car to warrant such a big TB.
 

·
Registered
Joined
·
1,065 Posts
charlie6n said:
If your still looking for a stock t-body, I have one. I have a 2004 mustang V6 and changed it with a BBK 70mm t-body. PM me if you are still looking for one.

How much, shipped to 47805 zip code?

As for TB sizes, you can't really "over-TB" a motor like being "over-carbed"
But you need post removal to really use a 70mm on an SPI motor. 70mm
will probably work on any 3.8 combo, but not really be needed for most.
Post removal is even good for a stock TB and unmodified motor, one guy
I know showed 5 RWHP gains from that alone.
 

·
Premium Member
Joined
·
381 Posts
RGR said:
How much, shipped to 47805 zip code?

As for TB sizes, you can't really "over-TB" a motor like being "over-carbed"
But you need post removal to really use a 70mm on an SPI motor. 70mm
will probably work on any 3.8 combo, but not really be needed for most.
Post removal is even good for a stock TB and unmodified motor, one guy
I know showed 5 RWHP gains from that alone.

What's post removal? Is it easy to do?/How do you do it?
 

·
Registered
Joined
·
3 Posts
NJStang86 said:
What kinda stuff you got on your car? 70mm is pretty big and for a car that new I'm wondering if you have enough work on the car to warrant such a big TB.

I have a MAC CAI, BBK 70mm T-body, Motoblue U/D Pullies, Magnaflow dual exhaust, SCT chip, and Bullitt handling system. Its still under construction. A buddy of mine told me that if I put in a bigger MAF that my intake system would get a whole lot more push. He suggested a C&L 73mm mass air meter. Any truth to this?
 

·
Registered
Joined
·
263 Posts
I would work on the internals of the engine first...

All that air going into a stock intake isn't going to do you any good. It seems like you've got plenty of work done in the air department, now you need to level that out with some engine work.
 

·
Registered
Joined
·
1,065 Posts
charlie6n said:
I have a MAC CAI, BBK 70mm T-body, Motoblue U/D Pullies, Magnaflow dual exhaust, SCT chip, and Bullitt handling system. Its still under construction. A buddy of mine told me that if I put in a bigger MAF that my intake system would get a whole lot more push. He suggested a C&L 73mm mass air meter. Any truth to this?

Yeah, wait for the cam/porting stuff before you do the MAF.
Then it will help alot. Especially with a stroker. Use a Lightning
MAF, they are cheaper, bigger, and easier to tune.
 

·
Registered
Joined
·
1,065 Posts
greenpony02 said:
What's post removal? Is it easy to do?/How do you do it?
#1, how I do it...


#2, I use a cover instead of plugs (looks cleaner)


#3, A true work of art!!! (ABSTRACT ART) :D
 
1 - 13 of 13 Posts
Top