Mustang Evolution Forum banner
1 - 20 of 23 Posts

·
Registered
Joined
·
269 Posts
Discussion Starter · #1 ·

·
Registered
Joined
·
119 Posts
You do need the new seat foam. The final price depends on the options. Go through as if you were going to purchase the items and it will give you the final price. you also have to do the work yourself, or pay a specialist to do it for you. I checked out the full set with leather and it was 849 without the foam. I believe the foam runs about 189.

---------- Post added at 12:00 PM ---------- Previous post was at 11:59 AM ----------

Sorry, the seat foam is 149 each for the buckets.
 

·
Registered
Joined
·
269 Posts
Discussion Starter · #3 ·
You do need the new seat foam. The final price depends on the options. Go through as if you were going to purchase the items and it will give you the final price. you also have to do the work yourself, or pay a specialist to do it for you. I checked out the full set with leather and it was 849 without the foam. I believe the foam runs about 189.

---------- Post added at 12:00 PM ---------- Previous post was at 11:59 AM ----------

Sorry, the seat foam is 149 each for the buckets.
Yeah that's how I understood it the final result sounds expensive. I'll keep waiting till I find some good leather seats local on Craigslist
 

·
Premium Member
Joined
·
25,464 Posts
I thought you could also get foam from tmi but it was extra? i assume the bullitt seats are close to gt form but not exactly the same on the sides at least, maybe 01 cobra upper foam?
 

·
Registered
Joined
·
269 Posts
Discussion Starter · #8 ·
I thought you could also get foam from tmi but it was extra? i assume the bullitt seats are close to gt form but not exactly the same on the sides at least, maybe 01 cobra upper foam?
Yeah they have those side bolsters as mentioned above but I want those bullitt style seats because they are jus pure sexiness
 

·
Registered
Joined
·
78 Posts
Hey everyone wondering if I'm reading and understanding this correctly because I wanted to purchase a whole set of seats from Cj pony parts but these seats don't come with the foam do they? The price seemed too good to be true for complete seats with brackets, foam, assembled and free shipping.

Mustang TMI Upholstery 2001 Bullitt Seats V6/GT 1999-2004 | CJ Pony Parts
First off let me say you need to purchase foam separately as this setup has more bolster than OE Bullitt seats. How do I know this? I donated my OE Bullitt seats to TMI to take on this project. The seats are even more comfortable than the OE Bullitt seats, plus the material is better quality.

You will use your OE 99-04 seat frames for this. If you have a 94-98, you will need to find 99-04 seats to use the frames to put these in your car.

Here are my seats after I got them back from TMI.







here is a little video about the products.
 

·
Registered
Joined
·
672 Posts
First off let me say you need to purchase foam separately as this setup has more bolster than OE Bullitt seats. How do I know this? I donated my OE Bullitt seats to TMI to take on this project. The seats are even more comfortable than the OE Bullitt seats, plus the material is better quality.

You will use your OE 99-04 seat frames for this. If you have a 94-98, you will need to find 99-04 seats to use the frames to put these in your car.

Here are my seats after I got them back from TMI.







here is a little video about the products.
That's some good info right there!
 

·
Registered
Joined
·
1,604 Posts
First off let me say you need to purchase foam separately as this setup has more bolster than OE Bullitt seats. How do I know this? I donated my OE Bullitt seats to TMI to take on this project. The seats are even more comfortable than the OE Bullitt seats, plus the material is better quality.

You will use your OE 99-04 seat frames for this. If you have a 94-98, you will need to find 99-04 seats to use the frames to put these in your car.

Here are my seats after I got them back from TMI.

here is a little video about the products.
<a href="http://www.youtube.com/watch?v=dqWWBz0jKLw">YouTube Link</a>
Nice! Do you still have your Bullitt?
 

·
Registered
Joined
·
78 Posts
Nice! You have one nice Bullitt. Do you mind me asking what kind of mods you've done to it?
First Gen JLT True Cold Air Kit
Eibach Sportline Springs
Steeda Tri-Ax Short Throw Shifter
18" Saleens powder coated Gun Metal Grey
3:73 Ford Racing Gears
Mac Pro Chamber Mid Pipe
Custom Bullitt Seats from TMI

Think that is about it. She is a daily driver so pictures make her look better than she actually is. I am about 94k into the motor so now the question is do I rebuild it or swap it with with an 03/04 Cobra or Coyote. I haven't really laid out a plan for it yet as life has taken control of me and not given me much time to play with it but once things settle down I will figure it all out.
 

·
Registered
Joined
·
1,604 Posts
First Gen JLT True Cold Air Kit
Eibach Sportline Springs
Steeda Tri-Ax Short Throw Shifter
18" Saleens powder coated Gun Metal Grey
3:73 Ford Racing Gears
Mac Pro Chamber Mid Pipe
Custom Bullitt Seats from TMI

Think that is about it. She is a daily driver so pictures make her look better than she actually is. I am about 94k into the motor so now the question is do I rebuild it or swap it with with an 03/04 Cobra or Coyote. I haven't really laid out a plan for it yet as life has taken control of me and not given me much time to play with it but once things settle down I will figure it all out.
You have a nice list of mods, I have a similar set up minus gears and a mid pipe. Good luck with your future build plans, I know how life can get in the way at times. If I could, i would definitely try to do the 03/04 Cobra drivetrain swap, but that's not a cheap operation. Here's mine.
 

Attachments

·
Registered
Joined
·
78 Posts
You have a nice list of mods, I have a similar set up minus gears and a mid pipe. Good luck with your future build plans, I know how life can get in the way at times. If I could, i would definitely try to do the 03/04 Cobra drivetrain swap, but that's not a cheap operation. Here's mine.
Nice looking Bullitt, mine hasn't seen a garage since I was in the Navy. I think a 03/04 Cobra will happen before the Coyote as that is just a very expensive swap because of all the extras you need. We'll see though.
 

·
Registered
Joined
·
119 Posts
Just in very general terms, approximately how much for the 03/04 cobra motor setup?

I have an 03 GT that is in great shape, never wrecked and not a spot of rust. But it has 100K on it as well. Just wondering if it would be cheaper to keep my car and upgrade, or look for what I really want.
 
1 - 20 of 23 Posts
Top