Mustang Evolution Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Good luck with your installation. Remember to align first, snug up on it, check all clearances around fuel lines, hoses, rear axle, fuel tank, align again, double-check, then tighten. If you can weld, it's a safe bet to weld all the places where the pipes meet each other. It's not a must and makes for a messy dissasembly because of the need to cut the pipes, but it will be much stronger. Have fun, and be careful.
 
1 - 1 of 1 Posts
Top