Mustang Evolution Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
269 Posts
Discussion Starter · #1 ·
So I have been in the market for a black spoiler. Found one on ebay with back up camera for $75, which is cheap for any spoiler so I got it. My question is, is there anyway to get the spoiler camera to work on my Raxiom unit? Has anyone done this?
 

·
Registered
Joined
·
5 Posts
So I have been in the market for a black spoiler. Found one on ebay with back up camera for $75, which is cheap for any spoiler so I got it. My question is, is there anyway to get the spoiler camera to work on my Raxiom unit? Has anyone done this?
what sort of output does the camera have?
 

·
Registered
Joined
·
269 Posts
Discussion Starter · #3 ·
what sort of output does the camera have?
It's Ford's own connector that goes to the navigation. Was just wondering if there was a way to splice it in.
 

·
Registered
Joined
·
269 Posts
Discussion Starter · #4 ·
Just got spoiler and thinking about some options to try. Before I start has anyone bought a oem spoiler for their raxiom and got it to work?

Sent from my SM-G935V using Mustang Evolution mobile app
 

·
Dragon Tail Master
Joined
·
1,316 Posts
I hooked it up to my Ford Nav, here is the plug you need to go to the camera

Wiring in the plug
The Red wire in the plug is pin 1 and goes to the WH/VT
Pin 3 in the camera plug is black and goes to black/purple
Pin 4 is black and goes to the bare shield wire.
Pin 6 and 7 are the 2 white wires in the camera plug, 6 goes to the WH/GR and 7 goes to Brown/Purple
and what they actually do
Switched 12v - WH-VT = RED Pin 1
Ground - BK-VT = BLACK Pin 3
Video Sheild - = BARE SHEILD - pin 4 (also black)
VIDEO + WH-GN = WHITE Pin 6
Video - BN-VT = WHITE pin 7
 

·
Registered
Joined
·
269 Posts
Discussion Starter · #6 ·
I hooked it up to my Ford Nav, here is the plug you need to go to the camera

Wiring in the plug
The Red wire in the plug is pin 1 and goes to the WH/VT
Pin 3 in the camera plug is black and goes to black/purple
Pin 4 is black and goes to the bare shield wire.
Pin 6 and 7 are the 2 white wires in the camera plug, 6 goes to the WH/GR and 7 goes to Brown/Purple
and what they actually do
Switched 12v - WH-VT = RED Pin 1
Ground - BK-VT = BLACK Pin 3
Video Sheild - = BARE SHEILD - pin 4 (also black)
VIDEO + WH-GN = WHITE Pin 6
Video - BN-VT = WHITE pin 7
I have seen the plug and wiring it into a Ford OEM Nav but didn't think the process would be the same for a Raxiom Nav.

Sent from my SM-G935V using Mustang Evolution mobile app
 

·
Dragon Tail Master
Joined
·
1,316 Posts
The Raxiom needs the video and you will need a power wire from the back up light circuit and ground wire.
 

·
Registered
Joined
·
269 Posts
Discussion Starter · #8 ·
I was going to try and splice the svideo cable onto the end of the factory camera but I believe they use different types of transmission. I'm just not sure how to get the video onto the raxiom sm

Sent from my SM-G935V using Mustang Evolution mobile app
 
1 - 8 of 8 Posts
Top