Mustang Evolution Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
421 Posts
Discussion Starter #1
I have read a lot of reviews of aluminum driveshafts and not one mentioned using new bolts. Ford of course claims they are single use. I finally got mine and was just going to put some loctite on the old ones. Is that a problem?
 

·
Registered
Joined
·
1,187 Posts
I bought a 12 point 12 mm socket to break loose the driveshaft bolts. So it wouldn't round the heads off. Once loose I switched to a 12 mm wrench to make it go faster. I used the old bolts with blue soft set loctite. Don't use red :)
 

·
Registered
Joined
·
1,288 Posts
Do as David said with the loctite, That is why Ford said those are single use. I still have mine in on my Aluminum driveshaft.
 

·
Registered
Joined
·
106 Posts
I did the same, i reused the stock bolts with blue loctite
 
1 - 5 of 5 Posts
Top