Mustang Evolution Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
155 Posts
Discussion Starter · #1 ·
So im changing my water pump i rented the pulley puller from oriellys i put the 2 pieces on the snout of the pulley slipped the sleeve on then threaded in the bolt and start tightening then the bolt just gets tight it doesnt pop off the pulley what am i doing wrong?

Auto part Suspension part Suspension Pipe
 

·
Registered
Joined
·
1,544 Posts
I think you need the claw version pulled for what you're trying to do?
 

·
Premium Member
Joined
·
3,419 Posts

·
Registered
Joined
·
155 Posts
Discussion Starter · #5 ·
I went back to and told then i had saw the claw one used on a video i saw i didnt see the guy do it but he said thats the one you needed

so then they also said the kit i rented is universal and should work just fine that thats what everyone uses i saw a guy on a forum use the kit i rented on his 4cyl foxbody
 

·
Registered
Joined
·
1,231 Posts
I put mine back on with a hammer. No one may want to take advice from me after reading this post. But it worked great.

BTW Two wrenches and a monkey or a contortionist
 

·
Registered
Joined
·
142 Posts
So im changing my water pump i rented the pulley puller from oriellys i put the 2 pieces on the snout of the pulley slipped the sleeve on then threaded in the bolt and start tightening then the bolt just gets tight it doesnt pop off the pulley what am i doing wrong?
That looks like the power steering pulley to me the water pump one should unbolt with 4 bolts and just about fall off.
 

·
Registered
Joined
·
155 Posts
Discussion Starter · #13 ·
I was using the wrong puller i was using the one that puts it back on lol but its off now took the water pump off tmrw im piecing it back together an no its not easier removing the whole bracket wit alt. and pwr steering pump its much easier just removing the pulley lol
 
1 - 13 of 13 Posts
Top