Mustang Evolution Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1,544 Posts
They do not affect your low end torque, but increase your HP & TQ from mid to high rpms.

Here is a good install for them if ur interested.

Charge Motion Delete Plates Install
 

·
Registered
Joined
·
1,693 Posts
They're cake to install. They're relatively cheap and they work :)
 

·
Registered
Joined
·
1,148 Posts
Here is a review that was done on our motion delete plates:

I installed a set of billet Charge Motion Control Delete plates on my 2005 Mustang GT during installation of my supercharger. Excellent constructed quality product. No machining marks or burrs. The intake ports are smooth and completely even.

Installation is simple- remove the plastic manifold plenum, unbolt the factory plates and bolt the Steeda plates in.

This product does require computing tuning, otherwise low RPM performance will be adversely effected. With tuning (SCT flash tuners include provisions for the plates) look for real 10 horsepower gains at the wheels throughout the power band.
Best Regards,

TJ
 

·
Registered
Joined
·
179 Posts
You actually do lose a little on the low end but most people see the mid and upper rpm range gains more important.
 

·
Registered
Joined
·
1,693 Posts
You actually do lose a little on the low end but most people see the mid and upper rpm range gains more important.
A good tune will show no loss, but no gains down low. But most will experience a loss of power, just not noticeable.
 
1 - 6 of 6 Posts
Top