Mustang Evolution Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
302 Posts
Discussion Starter · #1 ·
I bought a Cobra spoiler and light for my 01 GT. Came with the usual busted brake light, soI figured instead of 200 bucks, why not fix it.
I epoxied the tabs back on, then reinforced them with PC7 epoxy from behind, then sanded down with 400 wet paper, applied 2 coats of Bulldog adhesion promoter, then 3 coats of urethane clear coat. You can still see the cracks, but all in all, looks pretty good for stuff I had in the garage. And I think with the reinforcing in back it should last alot longer.
 

Attachments

· Registered
Joined
·
1,688 Posts
I bought a Cobra spoiler and light for my 01 GT. Came with the usual busted brake light, soI figured instead of 200 bucks, why not fix it.
I epoxied the tabs back on, then reinforced them with PC7 epoxy from behind, then sanded down with 400 wet paper, applied 2 coats of Bulldog adhesion promoter, then 3 coats of urethane clear coat. You can still see the cracks, but all in all, looks pretty good for stuff I had in the garage. And I think with the reinforcing in back it should last alot longer.
Nice job. Looks awesome.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top