Mustang Evolution Forum banner

1 - 20 of 105 Posts

·
Registered
Joined
·
3,045 Posts
Discussion Starter #1
Just like the title says, post your build lists. If you have dyno sheets and/or time slips for your current setup post them too. Lets try to keep this thread clean for those looking for info on common mods and results.

Current Build List
Engine:
  • Boss Intake Manifold
  • Boss Air Inlet Tube
  • American Muscle/Bama 93 Octane Tune

Exhaust:
  • UPR Off-road X-pipe
  • GT500 Axle-backs (blacked out)

Suspension:
  • Eibach Pro-Kit Springs
  • Eibach Camber Bolts
  • UPR Billet Lower Control Arms
  • UPR Double-adjustable Panhard Bar
  • BMR Tubular K-member
  • BMR Tubular A-arm Brace

Appearance/Other:
  • GT/CS Front Valence
  • Black Billet Grille (fog light and pony delete)
  • 18x9 (front/rear) and 18x10 (rear) Hypercoated GT4 Wheels
  • 275/40/R18 (front/rear) Nitto NT05 and 305/45R18 (rear) Nitto NT05R Tires
  • AMSOil MTG fluid swap (manual trans)
  • AMSOil Signature Series 5w30 and EA Oil Filter

Coming Soon
  • Koni Yellow "Sport" Shocks and Struts
  • FRPP/GT500 Strut Mounts
  • UPR Double-adjustable Upper Control Arm
  • Corbeau CR1 Seats
  • Rear Seat Delete
  • *maybe* Roll Bar/Cage and Harnesses
 

·
Registered
Joined
·
135 Posts
I am in the early stages still:

Current Build List
Engine:

C&L CAI
JLT Oil Separator

Exhaust:

Roush Axle-Backs

Suspension:

None Yet

Appearance/Other:

MRT Hood Struts
Tint 30/5

Coming Soon

MGW Short throw Shifter
Boss Intake Manifold
Tuner/Tune

Undecided on suspension work but I know I want to improve it
 

·
AmericanMuscle.com
Joined
·
2,878 Posts
You both have really good build list guys! All of these mods is definitely the recipe for a nasty Coyote :). Let me know if I can be of any assistance or if you guys ever have any questions!

-Dan
 

·
Registered
Joined
·
1,608 Posts
Nice list guys!!

---------- Post added at 10:36 AM ---------- Previous post was at 10:34 AM ----------

Post some pics.
 

·
Registered
Joined
·
3,045 Posts
Discussion Starter #5
AMDanBailer said:
You both have really good build list guys! All of these mods is definitely the recipe for a nasty Coyote :). Let me know if I can be of any assistance or if you guys ever have any questions!

-Dan
I need dampers bad. Any chance you guys will start carrying koni yellows? Right now the best price I've found I tirerack st $400 for the front set and $354 for the rear set. If you can help, shoot me a pm.
 

·
Registered
Joined
·
135 Posts
Nice list guys!!

---------- Post added at 10:36 AM ---------- Previous post was at 10:34 AM ----------

Post some pics.
I have pics of all my mods so far in my photo album

---------- Post added at 01:31 PM ---------- Previous post was at 01:30 PM ----------

You both have really good build list guys! All of these mods is definitely the recipe for a nasty Coyote :). Let me know if I can be of any assistance or if you guys ever have any questions!

-Dan
Thanks Dan,

I ordered my Roush exhaust from you and I am planning on ordering my Boss Intake and tuner from you in the upcoming months.
 

·
Registered
Joined
·
453 Posts
Current build list:

Engine:
Steeda cold air
Bama custom tunes.

Exhaust:
Borla s type catback

Interior:
Rear seat delete

Exterior:
20% window tint

Soon to come:
Gloss black 5.0 badges.
MMD hood strut kit
Barton short throw shifter
 

·
Registered
Joined
·
395 Posts
Black 2011 GT premium w/ 3.73s, security pkg, comfort pkg, hid's

Engine:
FRPP 5.0 aluminator w/ 9.5:1 compression
Procharger stage 2 w/ d1sc head unit, 75lb Bosch injectors, kenne bell bap, 4.63 pulley(10psi)
Dual pillar mounted autometer c2 boost and wideband a/f gauges

Drivetrain:
Steeda tri-ax w/ red bushing, dynomax 3.5 one piece aluminum driveshaft, bmr safety loop, frpp differential cover, mcleod rxt twin disc clutch, redline diff fluid, redline mtl trans fluid

Suspension:
Steeda billet lca's, steeda adjustable uca w/3rd link, steeda adjustable panhard w/ brace

Wheels:
AM black GT premiums staggered, 18 by 9 fronts w/nitto 555 255/45, 18 by 10 rear w/ MT 305/35

Appearance:
Cervini 2.5 cowl hood, mmr hood struts, black hood pins, roush black 7 bar grill, gt500 spoiler, roush white shift knob



image-2893317780.jpg

Coming soon(by spring):
Boss im, 4.33 pulley(13psi), bmr lca's w/ poly/spherical ends, bmr lca relo brackets, billet oil pump gears, roll bar with harness, and either nitto nt05r 315/40 or MT 305/45 rears(opinions?)

Then she's done:)
 

·
Registered
Joined
·
1,608 Posts
Black5.0 said:
Black 2011 GT premium w/ 3.73s, security pkg, comfort pkg, hid's

Engine:
FRPP 5.0 aluminator w/ 9.5:1 compression
Procharger stage 2 w/ d1sc head unit, 75lb Bosch injectors, kenne bell bap, 4.63 pulley(10psi)
Dual pillar mounted autometer c2 boost and wideband a/f gauges

Drivetrain:
Steeda tri-ax w/ red bushing, dynomax 3.5 one piece aluminum driveshaft, bmr safety loop, frpp differential cover, mcleod rxt twin disc clutch, redline diff fluid, redline mtl trans fluid

Suspension:
Steeda billet lca's, steeda adjustable uca w/3rd link, steeda adjustable panhard w/ brace

Wheels:
AM black GT premiums staggered, 18 by 9 fronts w/nitto 555 255/45, 18 by 10 rear w/ MT 305/35

Appearance:
Cervini 2.5 cowl hood, mmr hood struts, black hood pins, roush black 7 bar grill, gt500 spoiler, roush white shift knob

Coming soon(by spring):
Boss im, 4.33 pulley(13psi), bmr lca's w/ poly/spherical ends, bmr lca relo brackets, billet oil pump gears, roll bar with harness, and either nitto nt05r 315/40 or MT 305/45 rears(opinions?)

Then she's done:)
So you are basically stock right??? Lol jk
Awesome set up. Have u run 1/4 mile?
 

·
Registered
Joined
·
395 Posts
Black5.0 said:
Black 2011 GT premium w/ 3.73s, security pkg, comfort pkg, hid's

Engine:
FRPP 5.0 aluminator w/ 9.5:1 compression
Procharger stage 2 w/ d1sc head unit, 75lb Bosch injectors, kenne bell bap, 4.63 pulley(10psi)
Dual pillar mounted autometer c2 boost and wideband a/f gauges

Drivetrain:
Steeda tri-ax w/ red bushing, dynomax 3.5 one piece aluminum driveshaft, bmr safety loop, frpp differential cover, mcleod rxt twin disc clutch, redline diff fluid, redline mtl trans fluid

Suspension:
Steeda billet lca's, steeda adjustable uca w/3rd link, steeda adjustable panhard w/ brace

Wheels:
AM black GT premiums staggered, 18 by 9 fronts w/nitto 555 255/45, 18 by 10 rear w/ MT 305/35

Appearance:
Cervini 2.5 cowl hood, mmr hood struts, black hood pins, roush black 7 bar grill, gt500 spoiler, roush white shift knob

Coming soon(by spring):
Boss im, 4.33 pulley(13psi), bmr lca's w/ poly/spherical ends, bmr lca relo brackets, billet oil pump gears, roll bar with harness, and either nitto nt05r 315/40 or MT 305/45 rears(opinions?)

Then she's done:)
Almost for props:
Tuned by Brenspeed
 

·
Registered
Joined
·
1,791 Posts
DWC SmOziLLa's 2013 GT/CS Coyote Build Sheet

Current Build List

Engine Bay:
•2013 C&L Cold Air Intake
•BOSS 302 Intake Manifold, with Fuel Line and Evap. Hose
•BOSS 302 Fuel Rail Covers
•BOSS 302 Coil Covers
•BOSS 302 Strut Tower Brace

Exhaust:
•BBK CAT-Delete Pipes
•Flowmaster American Thunder CAT-Back

Suspension:
•Eibach Pro-Kit Springs
•Eibach Camber Bolts
•BMR Rear Lower Control Arms
•BMR Adjustable Panhard Bar

Appearance/Other:
•Matte Black 5.0 Fender Emblems
•Black 6 Spline Lug Nuts
•Black Locking Lug Nuts
•1/2" Wheel Spacers and Longer Wheel Studs
•MGW Short Throw Shifter
•FRPP 3.73 Gears
•FRPP Differential Cover
•Royal Purple Fluids (Coolant, Engine, Transmission, and Rear)
•Shaker Pro Audio System

Numbers:
•Dyno Stock: 387.02rwhp and 370.66rwtq (SAE Corrected)
•Dyno Currently: 446.42rwhp and 391.84rwtq (SAE Corrected)

•Quarter Mile Stock: 13.2 @ 108mph with a 2.3 or 2.4 60ft. (Stock 3.55 Gears)
•Quarter Mile Currently: 12.261 @ 114.42mph with a 1.894 60ft. (Stock Tires) Car#319

•Stock 19x8.5" Factory 2013 CS Wheels and P245/45R-19 Pirelli P-Zero Nero All-Season Tires

Tuning:
•SCT SF3/X3 Power Flash Tuner
•Tuned at Performance Evolution in Smryna, DE
•93 Octane Tune

Coming Soon:
•JPC Long Tube Headers
•BBK 90mm Throttle Body
•Accel Super Coil on Plug Kit
•SPEC Stage 2+ Clutch
•SPEC Billet Flywheel
•Aluminium One-Peice Driveshaft
•BMR Rear Upper Control Arm
•Drag Slicks and Skinnies
•Tint
•Eibach Pro-Damper Shocks & Struts

Coming Later:
•Vortech Centrifugal Supercharger V-3 Si Tuner Kit with Air-to-Air Charge Cooler, Black Finish
•Brembo Brake Package
•Roush Hood Scoop (Gloss Black)
•Paint Roof, Spoiler, and Side Mirrors (Gloss Black)
•TSW Nurburgring Wheels with Nitto Tires, Maybe?

I feel like I'am leaving stuff out,:lol:, I will add more if I remember later.:banghead:
:headbang:



BIG THANK YOU TO AMERICANMUSCLE.COM
GREAT PRODUCTS AND GREAT CUSTOMER SUPPORT
 

·
Registered
Joined
·
133 Posts
Current Build List
Engine:
•Roush CAI
•American Muscle/Bama 93 Octane Tune

Exhaust:
•JBA Ceramic coated Longtubes with Catted X-pipe
•Roush A/B's

Suspension: None yet, but soon....

Appearance/Other:
•Tint, 20/5
•Black Billet shorty antenna from UPR
•Black GT500 Wheels
•Black Hood Spears


Coming Soon:
•Suspensiion
•Raxiom Smoked Aero Tail Lights , Smoked Marker lights, Hood struts, CDC chin Spoilr and DG Customs Black hidden fog light grille.
 

·
Registered
Joined
·
1,791 Posts
Sorry Napoleon, if I knew my post would have ended up all but destroying your thread, I wouldn't have posted anything.

My bad.
 

·
Registered
Joined
·
39 Posts
Current Build List
Engine:
  • Boss Intake Manifold
  • Paxton 2200SL
  • Tuned by HPP Racing in Lewisville Texas

Exhaust:
  • Lethal o/r H pipe
  • GT500 Axle Backs

Suspension:
  • Steeda Sport springs

Appearance/Other:
  • GT500 spoiler
  • Skeleton pony
  • 20x9.5 Roush "Hyperblack" RS3 wheels
  • 275/35/20s all around

Coming Soon
  • Drag radials
[/QUOTE]



 

·
Registered
Joined
·
1,643 Posts
Exterior: All painted yellow accents are Ford's NQ Yellow Blaze

- Custom painted hood stripes (spears) Color - (Custom painted by Extreme Custom Collision in Woodbridge, VA)
- MRT rear louvers - (Custom painted by Extreme Custom Collision in Woodbridge, VA)
- Custom painted front Brembo Calipers - (Custom painted by Extreme Custom Collision in Woodbridge, VA)
- 3D500 Rear Spoiler
- MGP Rear Caliper Covers
- Forgestar F14 Wheels 19x10 Rear & 19x9 Front
- RTR Mustang Front Chin Spoiler with Splitter
- Roush Mustang Side Rocker Panel Splitters
- Painted Mirror Covers
- Painted 1/4 Panel Louvers
- 40 Series Flowmasters with black tips (Installed by Roberts Custom Exhaust)

Interior:

- MGW Short Throw Shifter
- Shift knob from Sickspeed
- 5.0 mats

Under the Hood:


- Ford Racing Supercharger 525HP (Whipple)
- GT500 Strut Tower Brace (Custom painted by Extreme Custom Collision in Woodbridge, VA)
- Hood Struts
- Various other caps / covers painted

Suspension:

- Ford Racing Handling Pack

Pics here:

Mustang Evolution - avengnd's Album: Photoshot and Graphic Design

or

Mustang Evolution - avengnd's Albums
 
1 - 20 of 105 Posts
Top