Mustang Evolution Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Ok I'm not really a mustang guy but I am a FORD man. I am putting a 92 mustang 5.0 ho engine in a 69 Bronco. I'm not planning on using the efi so I can't use the tfi distributor. Can anyone tell me what distributor I can use with the roller cam? My Bronco is already wired for the duraspark ignition. But here in Idaho nobody knows what distributor to use. Any info would be appreciated. Thanks.

P.S. The motor is a Police Interceptor, If that makes any difference.
 

·
Registered
Joined
·
222 Posts
You can run any regular Duraspark compatable dizzy. Just make sure you put on the correct drive gear.
Just remove the dizzy gear from the TFI one and put it on the Dura model.

Or just go down to AutoZone and get a replacement dizzy for an 85 Mustang GT with 4bbl. NOT the CFI model as it isnt a roller cam motor. Make sure its the 4bbl model.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top