Mustang Evolution Forum banner
1 - 20 of 46 Posts

· Premium Member
Joined
·
17,608 Posts
Stock gears are 3.27. You can also check by putting it on stands and counting the number shaft rotations per wheel rotations. YouTube will have some good videos to walk you through how to do it.
 

· Registered
Joined
·
83 Posts
Discussion Starter · #4 ·
Awesome,thanks for the info.I'm going to do that and see what I come up with.this was my first post on here.I'm looking forward to some upgrades real soon..as soon as I figure out what I want to add first.

---------- Post added at 09:12 PM ---------- Previous post was at 09:10 PM ----------

Where would it be on the diff??
 

· Premium Member
Joined
·
36,602 Posts
not all 99-04 are 3.27 it depend on auto/manual etc. You can look on the door jam or the rear end.

If all else fails jack up the rear mark a spot on the driveshaft then rotate the rear wheels one full turn and count the drive shaft revolutions, its the ratio.
 

· Registered
Joined
·
4,820 Posts
What's the stock gears for auto
 
1 - 20 of 46 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top