Mustang Evolution Forum banner

1 - 11 of 11 Posts

·
Premium Member
Joined
·
8,133 Posts
Race craft.com but I don't see a point of a 6' cowl you're not going to be able to see very well
 

·
Banned
Joined
·
8,044 Posts
What I would do is take some cardboard and tape together a 6" rise close to the size of the cowl on the hood you are looking at. Then with masking tape, tape it to your hood and pimp it around the block. That will give you an idea of the Vision you will loose. :good:
 

·
Registered
Joined
·
571 Posts
What I would do is take some cardboard and tape together a 6" rise close to the size of the cowl on the hood you are looking at. Then with masking tape, tape it to your hood and pimp it around the block. That will give you an idea of the Vision you will loose. :good:
That's the exactly what I did, but for a 4 inch, which was too big. 2.5-3.5 is a good size. 6 is huge for anything but the track.
 
1 - 11 of 11 Posts
Top