Mustang Evolution Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
451 Posts
Discussion Starter · #1 ·
So it's time for a new clutch I'm at 102k miles on a stock clutch, and I was looking at the Exedy stage 1 and the McLeod stage one, my question is do you think it's safe to have the flywheel resurfaced? And what all do I need. I know I need a throw out bearing because it has a little chatter, do I also need a new slave cylinder? And what does a shop usually charge to install this? Thanks for all the help guys!
 

·
Registered
Joined
·
2,789 Posts
Resurface the flywheel, 40 bucks! I got a CenterForce clutch I really like, and once the trans is out replace the TOB/slave cylinder and pilot bearing

Labor should be 350-500
 

·
Registered
Joined
·
451 Posts
Discussion Starter · #3 ·
BaSohol said:
Resurface the flywheel, 40 bucks! I got a CenterForce clutch I really like, and once the trans is out replace the TOB/slave cylinder and pilot bearing

Labor should be 350-500
Cool thanks for the help
 
1 - 3 of 3 Posts
Top