Mustang Evolution Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Ok so I had to replace one of my heads, yeah I know I should have done both but working on a budget. My question is I'm new to all of this and I didn't set my engine to top dead center but I've marked the chain and cam so I know exactly how to put it back on but is there anything else I need to know? After I put it back on the exact way it came off should I then turn it to top dead center? I only changed the pas side head so I only took off one cam. I marked the top and bottom so I'm sure it will be where it came off. Any help at all will be much appreciated.. Thanks guys
4.6 l 02 mustang gt 5 speed
 

·
Super Moderator
Joined
·
17,930 Posts
Look up "how to degree 2V cams" on youtube or google or wherever if you want a dead nuts 100% way to make sure you are where you need to be.
 
1 - 2 of 2 Posts
Top