Mustang Evolution Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
266 Posts
Discussion Starter · #1 ·
I bought a 55 watt high/low kit from ddm tuning and everything works good until I use my high beams. My drivers side actually projects lower when I turn on my brights the passenger side still raises tho. Any suggestions?
 

· Registered
Joined
·
7,367 Posts
sometimes whats known as reverse polarity takes place...swap the hi and low beam wire on the harness with each other and enjoy. you may have to readjust your low beam but besides that you're golden. let us know how it works
 

· Registered
Joined
·
266 Posts
Discussion Starter · #6 ·
sometimes whats known as reverse polarity takes place...swap the hi and low beam wire on the harness with each other and enjoy. you may have to readjust your low beam but besides that you're golden. let us know how it works
What is weird is one side works on high and the other doesn't.. But they both hook up to the same connector
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top