[redbeast0712]

I was wondering if anybody has seen or even have any kind of hood pin kits for a 2013 mustang. If so please post a pic.

 

[PRoss.20]

I was wondering if anybody has seen or even have any kind of hood pin kits for a 2013 mustang. If so please post a pic.

Check American muscle? Do the 11-12 year ones fit?

 

[redbeast0712]

I have seen those and they look nice but im not sure if they work the 13 have a different hood all together. I would to get the ones the are go through the hood not just the ones that stick on the hood

 

[primer2tone]

Any hood pin kit you buy would work for your 2013. Is there a particular style you like?

 

[redbeast0712]

Any hood pin kit you buy would work for your 2013. Is there a particular style you like?

I installed some shelby hood pins on a 06 mustang one time but the hoods on the 06 are more flat. I just wanted to see if anyone got them done so i could have a good confident install on my 13.

 

[08SteedaQ350]

I installed some shelby hood pins on a 06 mustang one time but the hoods on the 06 are more flat. I just wanted to see if anyone got them done so i could have a good confident install on my 13.

I did some searching and couldn't find anything. All I can find is the 'hood pin appearance kit'.

---------- Post added at 04:35 PM ---------- Previous post was at 04:32 PM ----------

I installed some shelby hood pins on a 06 mustang one time but the hoods on the 06 are more flat. I just wanted to see if anyone got them done so i could have a good confident install on my 13.

http://www.latemodelrestoration.com/item/UPR-1138-11/1979-12-Mustang-Upr-Black-Billet-Hood-Pin-Kit
Vehicle Applications
Ford Mustang - 1979 (79) - 1980 (80) - 1981 (81) - 1982 (82) - 1983 (83) - 1984 (84) - 1985 (85) - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93) - 1994 (94) - 1995 (95) - 1996 (96) - 1997 (97) - 1998 (98) - 1999 (99) - 2000 (00) - 2001 (01) - 2002 (02) - 2003 (03) - 2004 (04) - 2005 (05) - 2006 (06) - 2007 (07) - 2008 (08) - 2009 (09) - 2010 (10) - 2011 (11) - 2012 (12) - 2013 (13)

 

[primer2tone]

This might be a little overkill but this is what I did to my old hood on my '11. http://www.mustangevolution.com/forum/showthread.php?p=1052336 Take a gander.

 

[08SteedaQ350]

This might be a little overkill but this is what I did to my old hood on my '11. http://www.mustangevolution.com/forum/showthread.php?p=1052336 Take a gander.

I have a fiberglass hood. I'd be scared that I'd destroy it lol.
Those flush mounts look amazing. Nice job.

 

[primer2tone]

Thanks. I had spent the better part of the day and most of the night installing them. I probably measured my cuts 50 different ways before I actually cut into it.

I've got a CF cowl hood now and soon I'll be doing the install again.

 

[08SteedaQ350]

Thanks. I had spent the better part of the day and most of the night installing them. I probably measured my cuts 50 different ways before I actually cut into it.

I've got a CF cowl hood now and soon I'll be doing the install again.

Nice. I'll pick some up and swing over to Texas and pay you to do another install. Haha

 

[primer2tone]

Nice. I'll pick some up and swing over to Texas and pay you to do another install. Haha

Lets do it! I'd love to check out your mustang in person!

 

[08SteedaQ350]

Lets do it! I'd love to check out your mustang in person!

Where are you in Texas?

 

[primer2tone]

Corpus Christi. Along the coast.

 

[DWC_SmOziLLa]

I've often thought the same thing. If by chance I'm ever in Texas and so happen to have my mustang with me and by chance have in my possession said hood pin kit, then I'll look you up primes.

 

[primer2tone]

Right on!

 

[Compstall]

Never seen a hood pin kit that was vehicle specific

 

[redbeast0712]

All im asking is as anyone seen it on a 2013 i know i could make it work but i dont want to spend all day doing it i want an easy install

 

[primer2tone]

There's no easy install if you put them on corners of the hood. You gotta pull the front end apart. If you install them more towards the middle, you can use the holes in the radiator brackets. That would be really easy but IMO the hard way looks best.

 

[08SteedaQ350]

There's no easy install if you put them on corners of the hood. You gotta pull the front end apart. If you install them more towards the middle, you can use the holes in the radiator bracket.s That would be really easy but IMO the hard way looks best.

As a finish carpenter, patience is virtue. I it was easy, everyone would do it

 

[Filth and Fury]

Sounds like primer has a good reputation! ... Im in san antonio bro i could provide generous compensation haha