Mustang Evolution Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey guys, I was just wondering where my 2013 Mustang Gt cali special would be at in terms of horsepower numbers. So the mods go as such:
boss 302 intake manifold
Airaid CAI
JBA long tube headers
3.73 gears
Full straight pipe (no cats, mufflers, or resonators)
93 Lund tune
Thanks for the help!
 

·
Tech-Advisor
Joined
·
338 Posts
ok, here are the oem specs.....

ENGINE OPTIONSENGINE BORECOMPRESSIONHORSEPOWERTORQUE
3.7L Cyclone V-63.76 x 3.41 inches10.5:1305hp280 ft-lbs
5.0L Coyote V-83.63 x 3.65 inches11.0:1420hp390 ft-lbs
5.0L Coyote V-8 (Boss)3.63 x 3.65 inches11.0:1444hp380 ft-lbs

Add on...

Boss 302 Intake Manifold......... +10 hp/Zero TQ

Airaid CAI.................................. Zero

JBA Long Tube Headers........... +10 hp/+10 TQ

3.73 Gears................................ None, but it sure is gonna make the engine respond faster!
Full straight pipe (no cats, mufflers, or resonators)........ None, might actually loose a little as cats reduce HP/TQ by zero (well documented)... good flowing mufflers might take a few hp off the top end but this is muffler dependent

93 Lund tune........ out of the box type tune...Zero

So Total Gain IMHO....... About 20 hp+ and 10 Tq+

Which would put you at about....440hp/400 Tq
 

·
Tech-Advisor
2014 Premium GT, SGM, Brembo, Auto, Tech, Comfort
Joined
·
3,151 Posts
That's flywheel...of course. These cars make about 360-ish wheel stock.
 
  • Like
Reactions: Beechkid
1 - 4 of 4 Posts
Top