Mustang Evolution Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
42 Posts
Discussion Starter · #1 ·
per hour and/or for the work. i have a 65 mustang that has big rust holes on the rear quarter panels( both sides) that i can stick my fist thorugh and goes in the interior as well. Also for the floor pan when i took the capret out, a huge gap is getting wider right underneath the pedals. when i went to look at it underneath its slowly eating away and the previous owner just patched it up with a new sheet not replacing it. If i give him the parts that i ordered and help him out how much would he charge to cut off both quarter panels and floor pan and weld on new parts that i bought?
 

·
Registered
Joined
·
46 Posts
I would think thats quite a bit of labor. Most body shops charge 50-65 dollars an hour so without seeing pictures, figure a few thousand dollars.
 

·
Registered
Joined
·
40 Posts
By the time you pay for that you could buy a buzz box welder and get a spot welder and the other tools you would need from the Eastwood company and do it yourself and still save money.Your looking at about 60 bucks an hour for a shop to do it.
 
1 - 3 of 3 Posts
Top