How To Install A Mac Short Throw Shifter
1 - 6 of 6 Posts
Joined
·
11,873 Posts
http://v6stangs.com/index.php?page=how_to/performance/steeda_triax/index.php
here is a start. Not for your year but basically the same
here is a start. Not for your year but basically the same
Joined
·
65 Posts
Nice Nice!!!!!!
Joined
·
113 Posts
its funny that those short throw shifter manufacturers advertise that you won't miss third gear with their shifter...but i've never missed third! however i have missed 5th during quick shifting and by mistake went into third.
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
Post some pics of your v6 stang. Let's see these 6 bangers
Pre-2005 V6 MustangSent from my iPhone using Mustang Evolution- 358
- 24K
-
richie895 · updated
-
Straight Piped V6?
Pre-2005 V6 Mustangwould it be worth straight piping my v6? would i notice any hp gains?- 20
- 30K
-
Bamman · updated
-
Really odd and bad misfire issue
Pre-2005 V6 MustangI have a 2000 v6 mustang with a manual tranny. A few months ago I had a really shake from the engine and turned out to be the harmonic balancer, of which i replaced and i solved the issue. a week or so later i started getting misfires on cylinders 1 and 5. read up on it and changed the tone ring...- 4
- 176
-
Erratic Idle after header replaced
Pre-2005 V6 MustangHi guys, I'm having an issue that I cant seem to remedy after replacing my drivers side header. The story started last week when my check engine light came on and I went to get the codes scanned, I cant remember the code but it had to do with my driver side bank running too rich, funny...- 10
- 980
-
Smaller Torque Converter for 3.8/4.2 with 4R70W.
Pre-2005 V6 MustangSo I have a 2000 V6 Mustang and the engine is completely torn down. I'm gonna rebuild it as a naturally aspirated 4.2 stroker with a 224/230 cam from SSM, P&P heads, and P&P intakes. I'm told that I'll need a smaller torque converter for this to work properly. However, every 10" converter I...- 1
- 370
Join now to ask and comment!