Mustang Evolution Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter #1
Good evening. Need/want to replace my shocks and struts. Will also be changing the springs and going with a very minimal/moderate drop of around .75 all around. Will this still require adjustable caster camber plates and an adjustable panhard bar?

Thanks.
 

·
Registered
Joined
·
78 Posts
I put the Steeda sport springs on mine. With 1" drop in the front and just used the camber bolts in the front. Yes an adjustable panhard bar would be needed. These had 1.25 drop in the rear.
 

·
Registered
Joined
·
1,288 Posts
Mine with the .8/1.2 needed the Camber bolts and Panhard bar.
 

·
Registered
Joined
·
106 Posts
it depends the struts/shocks and the springs- I have put some bilstein B6 + einbach pro kit and I don't need plates or screws for the camber, since you can align them almost from stock. If or if you have to put an adjustable panhard or as I did, a watts link
 
1 - 4 of 4 Posts
Top