Lowering
1 - 13 of 13 Posts
Joined
·
8,133 Posts
1.5-2'. How low do you like
Joined
·
8,133 Posts
Go to search bar and there you will find many of these threads and what kits people are running
Joined
·
8,133 Posts
Yes they will. They sell those on eBay for like 100 bucks
Joined
·
7,311 Posts
If those are gt springs youll have to cut them thanks to the spring rate. There are about a half dozen lowering threads from the last month or so...feel free to search them and see what has been used. Whether you buy springs or cut your stockers we will help out where we can.
Joined
·
1,147 Posts
I have GT springs on mine and I love them. The measurement for how low it will go is from a GTs weight. Since the v6 is much lighter than the GT, it might not lower it as much as a GT. the rear will be the same but it won't lower it as much in the front. For example if the springs lower a GT 1.5 in the front. It would lower a v6 1.2-1.4. There really is not that much of a difference
Joined
·
3,274 Posts
I ran 1" wheel spacers in the rear with a 1.75 ish drop....couple of speed bumps or inclines and buy buy tires. I sliced em both to hell on the fenders. So the spacers were given away.
I would check your clearences before driving after getting everything together. You could also have your fenders rolled to prevent any issues with steep inclines.
Im not a fan of wheel spacers, I just bought a wider wheel and cut out the middle man.
I would check your clearences before driving after getting everything together. You could also have your fenders rolled to prevent any issues with steep inclines.
Im not a fan of wheel spacers, I just bought a wider wheel and cut out the middle man.
1 - 13 of 13 Posts
Join the discussion
Join now to ask and comment!