Not quite.. Lol you gotta remove the cluster obviously then pull the black piece with all the numbers off. Then turn it over and scratch off all the greenish film off of it. I just used a light to look through to the other side to see if it's clear or not yet. But yeah I used a knife lol but yeah after you scratched it all off just gotta put it back on and make sure you take a picture of your needles before taking them off so you can put them back exactly where they were before. Then you have to make sure the gauges aren't holding the needles from moving because it won't stick on all the way as it was before.. So just pull the needles out a bit so they don't stick.I like that so all u gotta do is swap the bulbs woth colored leds?