Mustang Evolution Forum banner

1 - 20 of 33 Posts

·
Registered
Joined
·
651 Posts
Discussion Starter · #1 ·
I have a 1999 V6 mustang and have seen a lot of forums on how people have installed windstar intakes on their mustangs, and I found a kit but the company VAP no longer sells the complete kit... I'm either trying to find someone who knows or is selling a kit or a full list of items/ parts required and directions needed to install the kit, any help would be much appreciated Thank You
 

·
Registered
Joined
·
434 Posts
I haven't yet once it gets warmer I am gonna get jt done probably sometime in march or April... Right now I'm prepping the manifold and cleaning it... I'm gonna have everything ready to go for the day I do the swap
 

·
Registered
Joined
·
651 Posts
Discussion Starter · #6 ·
Can anyone give the parts/items ( like gaskets, hoses etc...) that'll ill need for the swap, I'm going to keep egr and do the vap relocation of IAC, but I would like a good parts list cause I'm gettin confused from reading to many people opinions, all the help would be much appreciated
 

·
Registered
Joined
·
434 Posts
Well I got my windstar from eBay for 50 essentially you're gonna need:
Windstar intake
Bolts
Gaskets
Various hoses
Gt tb
Iac
Iac bracket
Coil bracket
A brass elbow 5/8 I think

A couple other things I forgot
 

·
Registered
Joined
·
1,694 Posts
you mean the solid metal butterfly plate or the metal tb shaft it bolts to? lol

the only thing you have to worry about is stripping the screws
 
  • Like
Reactions: 1slosix

·
Registered
Joined
·
651 Posts
Discussion Starter · #15 ·
Well I heard you can shave the bump off the v6 throttle body or am I better off just getting a gt throttle body?
 

·
Registered
Joined
·
651 Posts
Discussion Starter · #17 ·
Here's a list of parts I came up with that I think will be needed to compete it:
•Windstar intake w/ it's 12 bolts and retainers
•some T's for hoses
•Hoses in sizes 1/4" and 3/8"
•Assorted gaskets
• IAC relocations bracket( made or bought from VAP)
•Coil pack relocation bracket( made or from VAP)
•Windstar EGR low profile mount w/ bolts
•Throttle cable mounts( made )
•18 gauge wire for extending TPS, MAF and IAC plugs
•Replace internals of windstar TB with mustang V6 TB or get a GT TB
•Assorted CAI tubes or VAP CAI tube
•Hoses for PCV inlet an outlet
•Tools to slightly bend fuel and coolant rails
•IAC bracket( made )
•EGR electronics bracket
Am I missing anything else??
 

·
Registered
Joined
·
651 Posts
Discussion Starter · #19 ·
Yeahh, he referenced me to your windstar swap, really good btw, but I'm taking people ideas and stuff and refining my own
 

·
Registered
Joined
·
651 Posts
Discussion Starter · #20 ·
If anyone will read that parts list and will tell me if i left out anything please inform me, thank you
 
1 - 20 of 33 Posts
Top