Mustang Evolution Forum banner

1 - 20 of 39 Posts

·
Registered
Joined
·
1,065 Posts
Discussion Starter #1
I have a new process, POLY-HONE, about to take off
in a major way and it mimics Extrude Hone. It
includes several complimentary secret processes that
can be combined in numerous ways to increase airflow
and velocity.

SPI or CPI single port) Upper and Lower introductory
special is going to be $400, 200 each, Extrude Hone
charges $400 for the V6 uppers alone! Port matching
and/or hand porting available for additional cost.

My prices will always be well under Extrude Hone.

I can Poly-Hone heads too, and I am adding a new process
that no one has anything like, Dynamic Flow Processing
that simulates engine operating conditions by pulsing
the inlet runners in the same sequence as a running
engine! Nothing like it anywhere! Hand porting of heads
required before Poly-Hone processes are applied. But
package prices are available, a P-H reduces hand labor.
 

·
Registered
Joined
·
1,065 Posts
Discussion Starter #3
Working on it today B!

Now stay on topic guys!
 

·
Registered
Joined
·
1,286 Posts
what are the expected flow numbers on this process? (im still interested because i want a good ported head for my Evo, but only one place sells them right now)
 

·
Registered
Joined
·
1,065 Posts
Discussion Starter #6
Well, I can probably get any reasonable #'s obtainable
with a given valve size. The dependant variable is
"time of honing" so wildly high #'s would take longer
and therefore cost more, and require more prep
before the processes were applied. But for R&D
projects like yours, I can clearly offer discounts.
All you would have to so is this:

1. Obtain core(s) of parts to hone. This setup would easily benefit from
doing the entire induction system :D

2. Send cores for measurements, then I calculate the needed
port sizes and get some prep done (rough cutting the bowls, etc)

3. Poly-Hone it to finished specs.

4. Valve job.

5. After you get the new pieces, send me your origianl parts.
(this is where much of the R&D price savings comes from)


I do not have to offer this for Mustang stuff, I am doing most
of the R&D myself, and I don't need customer participation.
So save yer breath :D
 

·
Registered
Joined
·
567 Posts
someone buy it so Rob doesn't tempt me email after email to send my intakes in :D
 

·
Registered
Joined
·
1,065 Posts
Discussion Starter #9
once this takes off, I'll have then waiting in line I imagine :shock:
 

·
Registered
Joined
·
567 Posts
honestly at $400 not including porting, your gunna attract all the people willing/hardcore enough to mod the hell out of their v6(myself included).

Its not like your opening up to a whole new market.
 

·
Premium Member
Joined
·
897 Posts
ohhh I want to get this :headbang:
 

·
Registered
Joined
·
1,065 Posts
Discussion Starter #13
stangin99 said:
honestly at $400 not including porting, your gunna attract all the people willing/hardcore enough to mod the hell out of their v6(myself included).

Its not like your opening up to a whole new market.
It's a good price when Extrude Hone wants $400 for a upper
only and charges $80 or more for a "gasket match" and with me
you get my "Blueprint Porting Specs" for the hand porting. I also
am working on "Dynamic Flow Conditioning" of the P-H processes
that simulates engine operating conditions while honing :) It hones
the intakes and heads at the same time as well.
 

·
Premium Member
Joined
·
1,177 Posts
nice. will the upper&lower work well with an 11 psi blower? and can i get this befor the blower and still see good gains?
 

·
Registered
Joined
·
1,065 Posts
Discussion Starter #15
oaktonarcher said:
nice. will the upper&lower work well with an 11 psi blower? and can i get this befor the blower and still see good gains?
Yes, and it works for NA too, maintains good velocity...

Dyno gains are not yet recorded, I hope to get some
dyno #'s ASAP after I get some P-H products out there.
 

·
Registered
Joined
·
155 Posts
hey RGR, i have stage 3 intakes on the way from RPM. cut and weld upper ported through out and the lower is welded in certain areas for better flow.

just wondering what the polyhone would do for this setup?
 

·
Registered
Joined
·
1,065 Posts
Discussion Starter #18
Suprman said:
hey RGR, i have stage 3 intakes on the way from RPM. cut and weld upper ported through out and the lower is welded in certain areas for better flow.

just wondering what the polyhone would do for this setup?
It can stil help LOTS!
My first complete test case for single port is exactly
that, Stage 3 and P-H.

U wanna try too?
Special prices now!
 

·
Registered
Joined
·
678 Posts
RGR said:
It can stil help LOTS!
My first complete test case for single port is exactly
that, Stage 3 and P-H.

U wanna try too?
Special prices now!

me wants to try too....:D
 
1 - 20 of 39 Posts
Top