My 02 GT has a code for oxygen sensor bank two. Should I replace both sensors or can they be cleaned? Is there a particular sensor to use or not use with the Flowmaster pipes? Thanks.
Did you go catless? If not then you shouldn't be throwing codes because of the exhaust... I would change the sensors and do a little more investigation as to why the codes were thrown in the first place... You should be able to just use standard sensors with the new pipes.
It may just be time for new ones to be honest. After around 80k+ miles it wouldn't be a bad idea to replace them. Mine went bad a few weeks ago and I was throwing a code similar to that and was running rich enough to get about 9 mpg in town. It was awful.
---------- Post added at 09:39 PM ---------- Previous post was at 09:36 PM ----------
It may just be time for new ones to be honest. After around 80k+ miles it wouldn't be a bad idea to replace them. Mine went bad a few weeks ago and I was throwing a code similar to that and was running rich enough to get about 9 mpg in town. It was awful.
And I would change the pre-cat sensors first. If I understand correctly, those are the ones that give the proper air/fuel ratio and will have the biggest effect. The post cat sensors I know are for emissions purposes but may do more. Someone else a little more educated on the subject may can follow up further.
A rear sensor should cause any actual problem as far as I know, unless you have emissions where you love. But it never hurts to replace things as needed.
Rear sensors don't do anything except tell you if you're cats are working on not. If they are bad you'll be okay without replacing them. But if it was me I would replace so that your cel isn't on all the time. That way if something really happens you'll be able to tell when the cel goes on
If you replace it and it still throughs a code I have a trick on how to fix without buying the mil eliminators, but the o2 sensor has to be good not bad.
---------- Post added at 10:15 AM ---------- Previous post was at 10:14 AM ----------
The trick works on o/r x or h pipes with out cats.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Mustang Evolution Forum
2.1M posts
50.9K members
Since 2003
A forum community dedicated to Ford Mustang owners and enthusiasts. Come join the discussion about performance, horsepower, modifications, troubleshooting, racing, and more!