Mustang Evolution Forum banner

1 - 6 of 6 Posts

·
Banned
Joined
·
11,872 Posts
Discussion Starter #1
To take off the struts all I have to do is remove the strut nut and everything should come out right?
 

·
Registered
Joined
·
541 Posts
Yes,but listen you have to jack up the front of the car and support the front lower control arm. The spring will pop out when removing the upper strut nut. Put the front on jack stands and use the floor jack to support the control arm. Shoot off the nut first, then lower the jack slowly. Also disconnect the tie rod ends. BE CAREFUL THE FRONT IS UNDER A LOAD OF PRESSURE ESPECIALLY THE FRONT SPRINGS!!. Good Luck,

Matt
 

·
You want to **** me?
Joined
·
4,043 Posts
youre gonna have to remove the front calipers / rotors
 

·
Banned
Joined
·
11,872 Posts
Discussion Starter #6
We installed the srpings ourself so we know what we are doing, just needed to know if thats the only thing that needed to be removed.
 
1 - 6 of 6 Posts
Top