Mustang Evolution Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter · #1 ·
The wheel bearing went out while i was in town and i had to drive it about 1-2 miles so i could park it in a safe spot so i could find a trailer and bring it home. Once i got it home i pulled the wheel and drum off and the wheel bearing was seized to the spindle so i took my grinder and grind each side of the wheel bearing and took a chisel and pop it off, so it wasn't welded to it but when i was looking at the spindle i could see that it grind some on the spindle and if i remember it wasn't smooth either, the drum isn't usable any more but is the spindle still good?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top