Mustang Evolution Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
146 Posts
Discussion Starter · #1 ·
Just a heads up, to any member who has installed one of these.I'm driving home the other night and i can't shift into 4th gear fully.I skip 4th so I won't damage anything.
When I get home I pop off the console and boot and see that both pieces of the
aluminum shifter plates are moving freely.

Today I got up early and jacked up the car,so i could remove the two nuts from the bottom.Then removed the four bolts and took out the SR shifter.The four bottom bolts on the shifter were totally loose.I assume they were not tightened from the factory.
There was no info about this in the install instructions.

What a headache to fix this.Sorry for the long post.Just maybe I can save someone else trouble.I thought it might be my transmission.
 

·
Registered
Joined
·
146 Posts
Discussion Starter · #3 ·
Well, last week one day on my way to work it didn,t feel like it was all the way into 4th gear.Luckily it didn't force anything and skipped 4th and used 5th gear instead.

I just wanted to let anyone else who installed one of these,that if shifting troubles
come out of no where,it could be this.

After I tightened all the bolts super tight,it is back to shifting better than ever.
 
1 - 4 of 4 Posts
Top