Mustang Evolution Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
Everytime I turned the wheel it made a popping noise and I couldn't find out why. Turns out whoever had the car before me had taken out the bolt to the clamp on the steering shaft. Does anyone know where I can find the bolt or maybe a clamp and bolt package I can buy?
 

·
Banned
Joined
·
2,785 Posts
Try a local auto parts store or try ebay, good luck!
 

·
Registered
Joined
·
26 Posts
I have basically the same problem. I bought a rubber steering coupler but i cant figure out how to get the clamps off to install it.
 

·
Banned
Joined
·
8,044 Posts
I would try late model restoration. They have lots of parts like that. If not you can probably get one used from EHP. They are a site sponsor. And btw it most likely won't be on there website,l. You will have to call them. But with a 20 acre mustang only boneyard they should have it.
 

·
Registered
Joined
·
21 Posts
Discussion Starter #5
dreamstang said:
I would try late model restoration. They have lots of parts like that. If not you can probably get one used from EHP. They are a site sponsor. And btw it most likely won't be on there website,l. You will have to call them. But with a 20 acre mustang only boneyard they should have it.
I couldn't find anything on EHP
 
1 - 6 of 6 Posts
Top