Mustang Evolution Forum banner

1 - 20 of 21 Posts

·
Registered
Joined
·
58 Posts
Discussion Starter #1 (Edited)
Sup, names randy. I've got a 95 cammed/turboed v6 mustang (singleport). A lot of **** done to it. You could find me on a lot of other mustang forums.

So far my best et is [email protected] with a blown header gasket, cold night, running only 12psi (with the blown gasket, 15psi is what I was suppose to be at). Also only had one run during that track night.

I've been threw a lot over the past 3-4 years with it and now I got it to were I want it (not really but good still) :D

In 2012, I plan on seeing 12's or 11's.....:uhh:


Anyways, what's going on yall
 

·
Registered
Joined
·
2,104 Posts
236mustang said:
Sup, names randy. I've got a 95 cammed/turboed v6 mustang (singleport). A lot of **** done to it. You could find me on a lot of other mustang forums.

So far my best et is [email protected] with a blown header gasket, cold night, running only 12psi (with the blown gasket, 15psi is what I was suppose to be at). Also only had one run during that track night.

I've been threw a lot over the past 3-4 years with it and now I got it to were I want it (not really but good still) :D

In 2012, I plan on seeing 12's or 11's.....:uhh:

Anyways, what's going on yall
Sounds awesome! Post some pics up, I want to see this.
 

·
Registered
Joined
·
1,130 Posts
Welcome!
Sounds like 1 awesome stang!!
:D
 

·
Registered
Joined
·
58 Posts
Discussion Starter #5 (Edited)
Thanx yall


Here are a few pic...




With stock rims






Mod list...

57mm/t3 turbo
CxRacing 38mm Wastegate/ 15 # spring
CxRacing BOV
Comp Cam/Springs (210/226, 0.50/0.50 lift, 115 lsa)
351W SCAT H-Beam Rods w/arp bolts
Wiseco forged pistons/rings/pins/lox (8:8:1 C/R)
RevMax 3200 Stall
Stock 3.8 Crank
Super sport coil over (Red) springs
3" Downpipe
Ported Heads
ARP Head Studs
Rebuilt 1995 GT Transmission (Auto)
9.5" 3200 Stall
8.8 Rearend/3.73 gears
SCT 3000 MAF
42lb Injectors
BBK Adjustable Fuel Pressure Regulator
255lph fuel pump
BBK 56mm TB
Ford Racing Aluminum Driveshaft
VAP 1/2" Intake Manifold Spacer
SCT Livewire Tuner
BBK Underdrive Pulleys
Screamin Demon Ignition Coil

Walkround.....


YouTube - Broadcast Yourself.
 

·
Registered
Joined
·
2,104 Posts
Random question, horsepower and torque...?

---------- Post added at 11:16 AM ---------- Previous post was at 11:14 AM ----------

Oh, and one more....? You left it single port. Wouldn't doing a split port swap get you a lot more power?
 

·
Registered
Joined
·
58 Posts
Discussion Starter #13
Thanx

Random question, horsepower and torque...?

---------- Post added at 11:16 AM ---------- Previous post was at 11:14 AM ----------

Oh, and one more....? You left it single port. Wouldn't doing a split port swap get you a lot more power?
It was street tuned but I plan on getting it on a dyno very soon


Split port is already planned for the future. Going to buy motor/trans for $500 from a friend once he swaps motors.
 

·
Registered
Joined
·
2,104 Posts
236mustang said:
Thanx

It was street tuned but I plan on getting it on a dyno very soon

Split port is already planned for the future. Going to buy motor/trans for $500 from a friend once he swaps motors.
Okay, ha, just wondering... Oh, and are you planning on a forged block?
 
1 - 20 of 21 Posts
Top