Mustang Evolution Forum banner

1 - 20 of 24 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter #1
ok here is what i found so far i have a 99' mustang convertible
tell me if these will be good for my car and what else i need for awesome
handling and suspension

Gt rear sway bar
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33592&item=2432776935

Tokico Struts/Shocks and 1.25 lowering springs
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33590&item=2432502436
 

·
Premium Member
Joined
·
5,187 Posts
The sway bar will be fine. Tokico Shocks and struts are very good I have ot heard about there springs but that would probably be OK . But actually you could save a 100 bucks or more and get ford C springs for $109 and Bullitt Tokico shocks and struts for $180 from FPN
 

·
Registered
Joined
·
39 Posts
Discussion Starter #4
but would it lower it also? and is there any differnces since my car is a convertible?
 

·
Registered
Joined
·
39 Posts
Discussion Starter #6
so can you give me a specific link to buy them? or can you get on aim and msg me mself52
 

·
Registered
Joined
·
39 Posts
Discussion Starter #8
what about this?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33590&item=2432391620
or this
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33590&item=2432721534
which is better?
 

·
Registered
Joined
·
39 Posts
Discussion Starter #10
what about a link for those c-springs?
 

·
Premium Member
Joined
·
26,052 Posts
c springs gave me 1.3 front and .25 rear with half coil on rear cut. I think you will get a nice drop the rear will be lower but you can adjust the springs for the perfect drop so the front and rear match.
 

·
Registered
Joined
·
1,552 Posts
I think 94-98 cars must be heavier, lol.
 

·
Registered
Joined
·
1,552 Posts
lol, Well Corey, You know I am no lightweight.
 

·
Registered
Joined
·
22 Posts
Rick0636 said:
lol, Well Corey, You know I am no lightweight.
:wtf: and how might he know that?...
 

·
Banned
Joined
·
16 Posts
I'm not sure about the upper and lower control arms, those will probably be my next suspension mod... but the subframe connectors I got (with the cross braces) were probably one the the best mods I've done to my car to date. Night and Day kinda difference.

The strut tower brace I used to have was alright... but be careful when buying one, you wanna make sure to get one that offers you the absolute most engine clearance... I'm pretty sure the one from MM is the best (I had the Steeda and had to remove it when I got my spacers).
 
1 - 20 of 24 Posts
Top