Mustang Evolution Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
I recently got new wheels and tires and now would like to remove some of the gap between the wheel and fender. My car is a daily driver which also sees some snow in the winter, so i don't want a drastic drop, i'm thinking 1" is about as much as i should go. I do not track my car, so this mod is mainly cosmetic. What springs and shocks/struts do you all recommend? I know a lot of people like the konis (not sure if yellows or srt's would be better for me), and i've also found a set of ford racing with p springs pre assembled i am considering. I assume i will also probably need an adjustable panhard bar, gt500 strut mounts and possibly some camber bolts. I already have some steeda lca, do i need relo brackets as well? I also may need an adjustable uca? Lastly, will i need new sway bars? Not ready to pull the trigger here just yet, but i would like to get a good idea of what all is involved here. Thanks for your help
 

· Registered
Joined
·
3,697 Posts
Ok so you think the koni str will be sufficient for my needs? And do you recommend the ford racing p springs or is there something better for just a 1" drop?
yeah for DD use the Koni Strt are amazing. I currently have them with a 1.7" front drop and 2.4" rear drop and they ride so perfect. So much better than stock. They are stiffer but smoother at the same time. Car feels like it floats more but at the same time nose dive and body roll are greatly reduced.

Ford racing springs will be more than fine. I don't think I'd look at anything else. More than a few people with them on here and they are very happy with them.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top