Mustang Evolution Forum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
4,828 Posts
Be careful of cleaning threads with a tap and die if you get crooked you can really mess things up. But you can go to a tool store or Sears and buy thread chasers they are designed to clean threads up but not to cut them they have a flat tip. I have the snap-on kit shown bellow it has thread chasers and nut chasers and a couple of thread files in it. It is a life saver
 

·
Premium Member
Joined
·
4,828 Posts
This not for you then!!! We have a bunch of people here with limited tool experiencies and it is for them. I would hate for someone new at this and mess up something. I have been a mechanic for over 23 years and I can honestly say I have boogered up a few threads in my life !!!!!!! Thread chasers are great cause it is almost impossible to mess anything up "" I did say almost "" HAHAHHAHHAHA
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top