Mustang Evolution Forum banner

1 - 20 of 32 Posts

·
Registered
Joined
·
136 Posts
Discussion Starter #3
Stock fuel system. Thats after the tune

Sent from my SM-G920P using Mustang Evolution mobile app
 

·
Registered
Joined
·
1,129 Posts
I've got basically the same mods except stage 3 comp 270's and I'm just a little over 300, have a short throw shifter and some suspension stuff, I think if you do a little fuel system upgrades where it can be under to make a little more maybe you can get it higher with a. New tune
 

·
Registered
Joined
·
136 Posts
Discussion Starter #6
Ok ill look into it. Im thinking about doing a centrifugal over the winter.

Sent from my SM-G920P using Mustang Evolution mobile app
 

·
Registered
Joined
·
2,386 Posts
Sounds about right from others with the same mods. I think what i have read with "stage 2" cams (stages are subjective i know) that you are closer to the 300 mark or a little under. Fuel system feeding more fuel with the tune and maybe a plenum you will see 300 or a little more with an agressive tune. You were tuned by lidio right IIRMC? He is known for conservative tunes to ensure everything works right and isnt pushed to the limits of what you have. I bet with a little more agressive tune you could pick up 10hp and be closer to where you thought it would be. Get a sc and you will be very happy im sure of it!

Sent from my SM-G920P using Mustang Evolution mobile app
 

·
Super Moderator
Joined
·
17,968 Posts
That is what a cammed 99-04 PI motor will make with bolt ons. That's a pretty good number.


That said, if you have the stock 19s you are completely maxing them out right now. Throw some 24s in there and a re-tune and see what she does. Stock pump/lines/rails will be totally fine, just the injectors need upgraded.
 

·
Registered
Joined
·
136 Posts
Discussion Starter #9
Thanks guys I appreciate it. Im just gonna throw the SC on it and be done with making power. Sure ill be happy with that.

Sent from my SM-G920P using Mustang Evolution mobile app
 

·
Registered
Joined
·
252 Posts
I have what u have but shorty headers, 42lb injectors and



I have everything u have plus ported stock heads, 42# injectors, high flow fuel pump and pro products aluminum intake and really aggressive tune put down 328hp 345tq on 93, bout 10 more on 105

Sent from my LG-D415 using Mustang Evolution mobile app
 

·
Super Moderator
Joined
·
17,968 Posts
Thanks guys I appreciate it. Im just gonna throw the SC on it and be done with making power. Sure ill be happy with that.

Sent from my SM-G920P using Mustang Evolution mobile app
Should have done that in the first place. Will make just as much power with the stock cams as it does with aftermarket cams in a stock motor. Stock rods will let go around the 450 range regardless. Need a built motor to turn it up any higher.
 

·
Registered
Joined
·
136 Posts
Discussion Starter #12
You cant say i should have done that in the first place. I want to do more than just throw a blower on it. Thats why i started this build. Its not a budget build so im not worried about the money ive spent. Everthing ive done to the car should help it run more efficient with a blower on it. If after the SC its not enough ill build the motor and turn up the boost.

Sent from my SM-G920P using Mustang Evolution mobile app
 

·
Super Moderator
Joined
·
17,968 Posts
You cant say i should have done that in the first place. I want to do more than just throw a blower on it. Thats why i started this build. Its not a budget build so im not worried about the money ive spent. Everthing ive done to the car should help it run more efficient with a blower on it. If after the SC its not enough ill build the motor and turn up the boost.

Sent from my SM-G920P using Mustang Evolution mobile app
A supercharger on the stock motor can make much more power than the rods can take so like I said, cam swap and then a blower on a stock engine is a waste of money when you are still limited to the same number in both cases.

This is why you supercharge first and start working on suspension and then build a motor on the side.
 

·
Registered
Joined
·
136 Posts
Discussion Starter #14
Yes cause your the build master right? Does everyone follow your instructions? Im not limited when u have money to build js. Sure tour situation isnt like mines.

Sent from my SM-G920P using Mustang Evolution mobile app
 

·
Super Moderator
Joined
·
17,968 Posts
I've wasted enough money myself in the past. Plus you'll need new blower cams later on in the future. Whatever you want to do.

As far as the build master, far from it but I've been doing these cars for 15 years now so I just may have picked up a few things.

Sent from my LG-D801 using Mustang Evolution mobile app
 

·
Registered
Joined
·
136 Posts
Discussion Starter #17
I gotcha ya. I stopped listening to peoples advice when they would say google it. So now i dont want to hear what they have to say about my build. Alot of d**** in this group.

Sent from my SM-G920P using Mustang Evolution mobile app
 

·
Registered
Joined
·
1,069 Posts
I gotcha ya. I stopped listening to peoples advice when they would say google it. So now i dont want to hear what they have to say about my build. Alot of d**** in this group.

Sent from my SM-G920P using Mustang Evolution mobile app
Well you asking these guys the advice and opinions then you bash on them since you seem to know the answers then why ask just do what your gonna do and don't ask for opinions when your being the d***

Sent from my Nexus 6 using Tapatalk
 

·
Registered
Joined
·
136 Posts
Discussion Starter #19
I never ask what i should do in this thread. I ask about some numbers. You told me what i should do.

Sent from my SM-G920P using Mustang Evolution mobile app
 

·
Registered
Joined
·
136 Posts
Discussion Starter #20
Read it through. When did i ever ask what to do. You were the one that came out and said you shouldve done it this way js

Sent from my SM-G920P using Mustang Evolution mobile app
 
1 - 20 of 32 Posts
Top