Mustang Evolution Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter #1
Which one would be better to get first
ported upper and lower intake...
ported headers...
or a new cam...

i dont have the money to get them all
right now so i was wondering which one would
be best to get first???
Eventually yes i will get them all, but thats later on down
the road

-Matt
 

·
Registered
Joined
·
1,286 Posts
if you have the money for one now, and HAVE to spend it, i would get the intakes. it is easiest to do heads and cam at the same time. so i would save for heads and cam so you could do them now. but then again, you have to take the intakes off to take the heads off. so if you go for it, i would do it all at the same time.
 

·
Registered
Joined
·
1,552 Posts
Good thinking, save on your labor, or the money you spend on it, mechanics won't work cheap usually.
 

·
Registered
Joined
·
1,065 Posts
Cam I say. You can get a set of those lifter pullers (12) and
remove the cam without pulling the lower intake :D Cam alone
is probably the biggest boost in HP for the V6. For sure on the split
ports, which have good flowing heads & intakes stock.

Just an idea.
 
1 - 4 of 4 Posts
Top