Mustang Evolution Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
529 Posts
Discussion Starter #1
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33558&item=2435679631

I'm wondering if this throttle body would work on my 97. I'm looking to upgrade to a larger flow path.

Or would it just be best to stick with the 56 mm TB?

Thanks
 

·
Premium Member
Joined
·
5,187 Posts
No it is way to big and it wont fit with out a adapter or machining your upper Intake crossover tube then if you do that you have have the throttle linkage off a 3.8 TB welded onto the 65mm T/B besides it is a waste your engine will only use the air it needs and will show no gains. I have stage 3 intakes and heads with a large cam and I am only using a 87-93 60mm Gt T/B
 

·
Registered
Joined
·
529 Posts
Discussion Starter #3
Well, then I guess my question is what throttle bodies would work? I plan to port out my intakes once I have the TB
 

·
Premium Member
Joined
·
5,187 Posts
well the BBK throttle body or contact RGR Robert Green and he can set you up with a stock P&P half shafted T/B or a modded BBK throttle body which he says is better than a 60mm or larger T/B

http://www.rpm-mustangs.com/rgrcfm/index.html

and here is his email [email protected]
 

·
Registered
Joined
·
1,065 Posts
thanx for the plug Danger Dood

Danger Dude said:
well the BBK throttle body or contact RGR Robert Green and he can set you up with a stock P&P half shafted T/B or a modded BBK throttle body which he says is better than a 60mm or larger T/B

http://www.rpm-mustangs.com/rgrcfm/index.html

and here is his email [email protected]
Yeah, I like the 56mm BBK, it looks nice and is a direct fit
for a 94-98 Mustang. Also, 1/2 shafted and ported it will
flow about like a 60mm 5.0 TB and there are no throttle
cable issues, TPS issues, or IAC issues. Plus the BBK
can be bored out to ~64mm later if you need that much,
but then your upper intake's crossover tube needs material
added to accomodate the porting required to use TB's that
big. The 56mm is a great piece!

I'd do an upper and TB for you, and I believe I can get
the TB for you, it would probably be $250.

[email protected] Email me and
we can discuss it.
 
1 - 5 of 5 Posts
Top