Mustang Evolution Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited)
Wiper arms on my 2005 GT Stang were looking their age. I decided to save a few $$$ and try refurbishing them myself.

- Removed wipers from vehicle
- I used a 10"-12" piece of wood and rubber mallet to remove the wiper arms
- I loosened both nuts to the top of the stud and gently tap using the mallet and wood
- Took off the old paint and rust using a glass bead blaster
- Wet sanded with 400 grit paper
- Removed dirt and any oils with acetone
- 2 to 3 coats of Rust-Oleum Self-Etching Primer
- 2 to 3 coats of Rust-Oleum Trim & Bumper Paint

Overall, very pleased with how they turned out. If you have any questions or suggestions, please shoot me an email. Thanks
 

Attachments

1 - 2 of 2 Posts
Top