Mustang Evolution Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
7,311 Posts
if only you had met me a month ago i could have hooked you up with a full m112 swap for $1k lol. you can buy new adapter plates ranging from $700-900, but you can usually find a used one for under $500 or less. good sc if you're wanting high tq numbers. my friend got well over 400 hp and 400 ft lbs of tq with his before he sold it all. research some of the m112 builds on 3.7 forums if you're wanting detailed parts listing
 

·
Registered
Joined
·
33 Posts
Discussion Starter · #7 ·
Hood would be replaced. I was just not sure if this sc would be a good fit. It would of been a nice deal to have that.
 

·
Registered
Joined
·
7,311 Posts
Hood would be replaced. I was just not sure if this sc would be a good fit. It would of been a nice deal to have that.
you'll want a 4" cowl...you can get away with a 2.5" cowl, but you'll have to cut a hole in it for the pulley lol. we learned that the hard way. here's his v6 after it was all said and done.

2.5" cowl


4" cowl
 
1 - 12 of 12 Posts
Top