Before any hate, this idea was brought on by an AM rep to post this here.
I have a 2014 V6 Performance Pack. As most are aware, the rims are the same as the 2013/14 CS besides color.
Now, I have searched High and Low. I have reached out to AM and other people. Checked reviews/Pics all over AM for everything from Big Brake kits to wheel spacers. I CANNOT figure out if these rims clear the 4 Piston Brembo calipers. Like the ones found on the 2013/14 GT Track Pack cars.
Here is a thread I have in the V6 section: http://www.mustangevolution.com/forum/f356/t367969/
Here is the Brake Kit:
Ford Racing Mustang SVT Front Brake Upgrade Kit M-2300-S (05-14 GT, V6) - Free Shipping=
Now the GT/CS and the Brembo rims are the Same Size (255/40/19). But the only thing still unknown is if it clears the spokes.
I measure on my car and I got about 3/4" in. left of clearence between my stock caliper and spoke. Not sure if this is enough. I CANNOT find specific measurements for these exact brakes. There is a template out on the interwebs, but it does not specify if it is for the 6 piston or the 4 piston calipers. I need the 4 piston ones.
Any and ALL help is appreciated as I have been racking my brain with this.
If I have to buy wheel spacers, I am fine with this. I will then just need to know which spacers to get.
I have a 2014 V6 Performance Pack. As most are aware, the rims are the same as the 2013/14 CS besides color.
Now, I have searched High and Low. I have reached out to AM and other people. Checked reviews/Pics all over AM for everything from Big Brake kits to wheel spacers. I CANNOT figure out if these rims clear the 4 Piston Brembo calipers. Like the ones found on the 2013/14 GT Track Pack cars.
Here is a thread I have in the V6 section: http://www.mustangevolution.com/forum/f356/t367969/
Here is the Brake Kit:
Ford Racing Mustang SVT Front Brake Upgrade Kit M-2300-S (05-14 GT, V6) - Free Shipping=
Now the GT/CS and the Brembo rims are the Same Size (255/40/19). But the only thing still unknown is if it clears the spokes.
I measure on my car and I got about 3/4" in. left of clearence between my stock caliper and spoke. Not sure if this is enough. I CANNOT find specific measurements for these exact brakes. There is a template out on the interwebs, but it does not specify if it is for the 6 piston or the 4 piston calipers. I need the 4 piston ones.
Any and ALL help is appreciated as I have been racking my brain with this.
If I have to buy wheel spacers, I am fine with this. I will then just need to know which spacers to get.
